Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
- If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear, turn the camcorder off, wait for a few moments, and then turn it on again. - Do not place the camcorder with the open LCD screen down. - Close the LCD monitor when not using the camcorder. • Liquid crystal display: - The LCD screen is a product of high precision technology. Out of the total pixels (approx. 112,000 pixels of an LCD monitor ), 0.01% or less pixels may be out (black dots) or may remain lit as coloured dots (red, blue, and green). This shows the limitations of the current technology, and does not indicate a fault that will interfere with recording. - The LCD screen will be slightly dimmer than usual when the camcorder is at low temperature, as in cold areas, or right after the power is turned on. Normal brightness will be restored when the temperature inside the camcorder rises. Note that the foregoing phenomena have no effect on the image in a storage media, so there is no cause for concern. • Hold the memory camcorder correctly: - Do not hold the memory camcorder by the LCD monitor when lifting it: the LCD monitor could detach and the memory camcorder may fall. • Do not subject the memory camcorder to impact: - This memory camcorder is a precision machine. Take great care that you do not strike it against a hard object or let it fall. - Do not use the memory camcorder on a tripod in a place where it is subject to severe vibrations or impact. • No sand or dust! - Fine sand or dust entering the memory camcorder or AC power adaptor could cause malfunctions or defects. • No water or oil! - Water or oil entering the memory camcorder or AC power adaptor could cause electric shock, malfunctions or defects. • Heat on surface of product: -The surface of the memory camcorder will be slightly warm when using, but this does not indicate a fault. English_vi • Be careful of unusual ambient temperature: -Using the memory camcorder in a place where the temperature is over 140°F (40°C) or lower than 32°F (0°C) may result in abnormal recording/playback. -Do not leave the memory camcorder on a beach or in a closed vehicle where the temperature is very high for a long time: This could cause malfunctions. • Do not point directly at the sun: - If direct sunlight strikes the lens, the memory camcorder could malfunction or a fire could occur. -Do not leave the memory camcorder with the LCD screen exposed to direct sunlight: This could cause malfunction. • Do not use the memory camcorder near TV or radio: -This could cause noise to appear on the TV screen or in radio broadcasts. • Do not use the memory camcorder near strong radio waves or magnetism: -If the memory camcorder is used near strong radio waves or magnetism, such as near a radio wave tower or electric appliances, noise could enter video and audio that are being recorded. During playback of normally recorded video and audio, noise may also be present in picture and sound. At worst the memory camcorder could malfunction. • Do not expose the memory camcorder to soot or steam: -Thick soot or steam could damage the memory camcorder case or cause malfunctions. • Do not use the memory camcorder near corrosive gas: -If the memory camcorder is used in a place where there is dense exhaust gas generated by gasoline or diesel engines, or corrosive gas such as hydrogen sulphide, the external or internal terminals could corrode, disabling normal operation, or the battery connection terminals could corrode, so that power will not turn on. • Do not use the memory camcorder near ultrasonic humidifi er: -Calcium and other chemicals dissolved in water could scatter in the air, and white particles could adhere to the optical head of the memory camcorder, which could cause it to operate abnormally. • Do not clean the memory camcorder body with benzene or thinner: -The coating of exterior could peel off or the case surface could deteriorate. -When using a chemical cleaning cloth, follow the instructions. • Keep the memory card out of reach of children to prevent swallowing. • To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. English_vii precautions on use ABOUT THIS USER MANUAL • SMX-F33(2)BP/LP/RP/SP and SMX-F34(0)BP/LP/RP/SP models support built-in flash memory (8GB (SMXF33( 2)BP/LP/RP/SP only)/16GB (SMX-F34(0)BP/LP/RP/SP only)). • Illustrations of SMX-F34BP model are used in this user manual. • The displays in this user manual may not be exactly the same as those you see on the LCD screen. • Designs and specifications of storage media and other accessories are subject to change without any notice. • For Open Source Licence information, refer to the “Opensource.pdf” in the provided CDROM. NOTES REGARDING A TRADEMARK • All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks ...
Ce manuel est également adapté pour les modèles :Caméscopes - SMX-F300BP (11.19 mb)
Caméscopes - SMX-F300RP (11.19 mb)
Caméscopes - SMX-F300SP (11.19 mb)
Caméscopes - SMX-F30BP (11.19 mb)