Log:
Évaluations - 4, GPA: 4.5 ( )

Instructions Sony, Modèle DCR-SR77E

Fabricant : Sony
Taille : 4.71 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


C:04:.. . The battery pack is not an “InfoLITHIUM” battery pack (H series). Use an “InfoLITHIUM” battery pack (H series) (p. 10). . Connect the DC plug of the AC Adaptor to the DC IN jack of your camcorder securely (p. 10). C:13:../ C:32:.. . Remove the power source. Reconnect it and operate your camcorder again. E:20:../ E:31:../ E:61:../ E:62:.. / E:91:../ E:94:.. . Your camcorder needs to be repaired. Contact your Sony dealer or local authorized Sony service facility. Inform them of the 5-digit code, which starts from “E.” 101-0001 . When the indicator flashes slowly, the file is damaged or unreadable. . The hard disk of your camcorder is full. Delete unnecessary images on the hard disk (p. 34). . An error may have occurred with the hard disk drive in your camcorder. . . Battery power is low. . The temperature of your camcorder is getting high. Turn off your camcorder and leave it in a cool place. . The temperature of your camcorder is low. Make the camcorder warm. . No “Memory Stick PRO Duo” media is inserted (p. 36). . When the indicator flashes, there is not enough free space for recording images. Delete unnecessary images (p. 34), or format the “Memory Stick PRO Duo” media (p. 34) after storing the images on other media. . The Image Database File is damaged. Check the Image Database File by touching (HOME) . (MANAGE MEDIA) . [REPAIR IMG.DB F.] . recording media. . The “Memory Stick PRO Duo” media is damaged. Format the “Memory Stick PRO Duo” media with your camcorder (p. 34). . Incompatible “Memory Stick Duo” media is inserted (p. 36). . . Access to the “Memory Stick PRO Duo” media was restricted on another device. . The camcorder is unsteady. Hold the camcorder steady with both hands. However, note that the camera-shake warning indicator does not disappear. . The drop sensor function is activated. You may not be able to record nor play back images. . The recording media is full. Delete unnecessary images (p. 34). Additional 4 Precautions On use and care . Do not damage the power cord (mains lead) . Do not use or store the camcorder and accessories in the following locations: .Anywhere extremely hot, cold or humid. Never leave them exposed to temperatures above 60 .C (140 °F), such as under direct sunlight, near heaters or in a car parked in the sun. They may malfunction or become deformed. .Near strong magnetic fields or mechanical vibration. The camcorder may malfunction. .Near strong radio waves or radiation. The camcorder may not be able to record properly. .Near AM receivers and video equipment. Noise may occur. .On a sandy beach or anywhere dusty. If sand or dust gets in your camcorder, it may malfunction. Sometimes this malfunction cannot be repaired. .Near windows or outdoors, where the LCD screen or the lens may be exposed to direct sunlight. This damages the inside of the LCD screen. . Operate your camcorder on DC 6.8 V/7.2 V (battery pack) or DC 8.4 V (AC Adaptor). . For DC or AC operation, use the accessories recommended in these operating instructions. . Do not let your camcorder get wet, for example, from rain or sea water. If your camcorder gets wet, it may malfunction. Sometimes this malfunction cannot be repaired. . If any solid object or liquid gets inside the casing, unplug your camcorder and have it checked by a Sony dealer before operating it any further. . Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering, dropping or stepping on the product. Be particularly careful of the lens. . Keep the LCD screen closed when you are not using your camcorder. . Do not wrap your camcorder with a towel, for example, and operate it. Doing so might cause heat to build up inside. . When disconnecting the power cord (mains lead), pull it by the plug and not the cord. such as by placing anything heavy on it. . Do not use a deformed or damaged battery pack. . Keep metal contacts clean. . If the battery electrolytic liquid has leaked: .Consult your local authorized Sony service facility. .Wash off any liquid that may have contacted your skin. .If any liquid gets in your eyes, wash with plenty of water and consult a doctor. When not using your camcorder for a long time . To keep your camcorder in optimum state for a long time, turn it on and let it run by recording and playing back images about once a month. . Use up the battery pack completely before storing it. LCD screen . Do not exert excessive pressure on the LCD screen, as it may cause damage. . If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is not a malfunction. . While using your camcorder, the back of the LCD screen may heat up. This is not a malfunction. To clean the LCD screen . If fingerprints or dust make the LCD screen dirty, it is recommended that you use a soft cloth to clean it. When you use the LCD Cleaning Kit (sold separately), do not apply the cleaning liquid directly to the LCD screen. Use cleaning paper moistened with the liquid. On handling...

Ce manuel est également adapté pour les modèles :
Caméscopes - DCR-SR37E (4.71 mb)
Caméscopes - DCR-SR38E (4.71 mb)
Caméscopes - DCR-SR47E (4.71 mb)
Caméscopes - DCR-SR48E (4.71 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories