Repeat the same procedure to set the date and year. . When you set the time, press and hold rt to change the time by 30 minutes. . When you set the date, press and hold rt to change the date by 15 days. F F Set Just Clock. The default setting is “OFF”. Set as desired by pressing rt, then press OK or e. . For the Just clock function, refer to “Just Clock” on page 80. . If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments. G G Set the sourc
. To record in VHS: Insert a cassette marked “VHS”. Set “S-VHS ET” to “OFF” (. pg. 15). . To record in VHS on an S-VHS cassette: Insert a cassette marked “S-VHS”. The S-VHS indicator lights up on the display panel. Then, set “S-VHS MODE” to “OFF” (. pg. 16). The S-VHS indicator goes off. The VHS recording mode is selected. NOTE: When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS indicator lights up on the display panel regardless of the “S-VHS ET” or “S-VHS MODE” set
1 1 Turn on the DBS receiver Turn on the DBS receiver using the Power button on the DBS receiver or its Remote. 2 2 Enter DBS receiver brand code Follow the example shown below. 1 Press and hold CABLE/DBS. 2 Press MBR SET. 3 Press the Number keys to enter your DBS receiver’s brand code by referring to the table below. 4 Press OK, and release CABLE/DBS. The DBS receiver should turn off. If it does, try other operations below ( step 3). . Once you have set the Remote to operate the DBS receiver, y
If you have a decoder connected to the AV2 (L-2) IN/DECODER connector, be sure to set “L-2 SELECT” back to “DECODER” after editing. . If you’re not connecting a decoder to the AV2 (L-2) IN/ DECODER connector, leave “L-2 SELECT” set to “L-2”. . The default setting is “L-2”; if the recorder’s memory backup has expired due to a power cut or because the AC was removed from the recorder, “L-2” will be automatically selected when the power is restored to the recorder. If you are using a decoder, be su
When programming the timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly (. pg. 24, “SHOWVIEW® Timer Programming”). . Your video recorder memorizes all detected stations even if reception of some of them is poor. You can delete those stations with an unacceptable picture (. pg. 43, “Delete A Channel”). INFORMATION Language for the on-screen display Auto Set Up also selects the language automatically for the on-screen display depending on the Country settin
CONTENTS Buttons, Connectors and Indicators ................................................4 Connections and Plug&Play Setting ................................................5 Initial Settings ..............................................................................6 Language Setting ....................................................................6 Clock Setting ..........................................................................6 Tuner Setting .......................
. Auto Clock Set may not function properly depending on the reception condition. . If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels (. pg. 43, “INFORMATION”). 10 EN INITIAL SETTINGS (cont.) Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set ATTENTION You can use this
. It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. (. pg. 52) D D Start recording. Press and hold 7 and press 4 on the remote control, or press 7 on the recorder. . If “O.S.D.” is set to “ON” (. pg. 49), “MARK” blinks on the screen while an index code is being marked. . When “DIRECT REC” is set to “ON” (. 50), if you press any button just after pressing 7 on the recorder (or 7 and 4 on the remote control), the recorder may not function properly. B.E.S.T. takes place a
, ? ABC DEF GHI JKL MNO PQRS TUV WXYZ AUX TV VO A.MONITOR DISPLAY OSD ENTERBACK CLEAR MENU NAVI Integrated HDTV For Customer Use: Enter below the Model No. and INSTRUCTIONS Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. LPT0960-001B 2 EN Dear Customer, Thank you for purchasing the JVC D-VHS video cassette recorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe
DON'T allow electrical equipment to be exposed to rain or moisture. ABOVE ALL... — NEVER let anyone especially children push anything into holes, slots or any other opening in the case — this could result in a fatal electrical shock; — NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry! 55 QUICK SET UP GUIDE Dear Customer, Thank you for purchasing this JVC Video Cassette Recorder. Please use this QUICK SET UP GUIDE to help you to set up your vi