Évaluations - 4, GPA: 3.3 ( )

Fabricant : Sony Taille : 803.66 kb Nom Fichier : Langue d'enseignement:

The t indicator appears in the display window and the VCR stands by for recording. Basic Operations continued Basic Operations Recording TV programmes using the Easy Timer function (continued) Setting or changing the Easy Clock When “–:– –” is displayed in the display window, the VCR clock has not been set. You need to set the clock using the Easy Clock function before setting the timer. You can also change the current time using the Easy Clock function. 1 2 3 4 5 6 7 8 9 0 EASY TIMER knob Programme number buttons EASY TIMER PROG +/– 1 EASY TIMER • When “–:– –” is displayed in the display window, press EASY TIMER. • To change the clock setting, press and hold the EASY TIMER knob on the VCR for more than three seconds. The CLOCK indicator and the current clock setting appear in the display window. SP APC CLOCK 2 EASY TIMER Set the current time using the EASY TIMER knob. 1 Turn the EASY TIMER knob clockwise or counterclockwise to enter the current hour. 2 Press the EASY TIMER knob to confirm the hour setting. 3 Turn the EASY TIMER knob to increase or decrease the minutes setting by a minute. Basic Operations SP APC CLOCK EASY TIMER SP APC START Press the EASY TIMER knob to confirm the clock setting. The VCR enters the timer recording setting mode. To continue the Easy Timer setting, go to step 2 in “Setting the Easy Timer” on page 26. To quit the Easy Timer setting mode without changing any settings, press the EASY TIMER knob repeatedly until the t indicator appears in the display window. To set the timer and clock setting using the remote commander You can also use the remote commander to set the Easy Timer and Easy Clock. The operations on the VCR and the remote commander correspond as follows: To Do this on the VCR Do this on the remote commander Confirm the setting and go to the next setting Press EASY TIMER knob Press EASY TIMER Change the time by 15 minutes (in START/STOP mode) Turn EASY TIMER knob or hold PROGRAM +/– down Hold PROG +/– down Change the time by one minute (in START/STOP mode) Press PROGRAM +/– Press PROG +/– Select the programme Turn EASY TIMER knob or press PROGRAM +/– Press PROG +/– or INPUT SELECT Change the hour/minute by one hour/minute (in CLOCK mode) Turn EASY TIMER knob or press PROGRAM +/– Press PROG +/– Basic Operations You can also use the programme number buttons to set the clock, start and stop times, and the programme you want to record. Just press the programme number buttons to enter the hours and minutes. For example: • To set the clock to “8:20”, press 0, 8, EASY TIMER , 2, 0 and EASY TIMER in sequence. • To set the start or stop time to “8:20”, press 0, 8, 2, 0 and EASY TIMER in sequence. If you make a mistake, re-enter the correct digits before pressing EASY TIMER . continued Basic Operations Recording TV programmes using the Easy Timer function (continued) To stop recording To stop the VCR while recording, press x STOP. To check or change the timer setting Press the EASY TIMER knob repeatedly until the setting you want to check or change flashes. Then re-enter the new setting, if necessary. If you do not want to change any of the settings, press the EASY TIMER knob repeatedly until the t indicator appears in the display window. You can also change the timer setting using the TIMER SET/CHECK menu. For details, see page 38. To cancel the timer setting To cancel the Easy Timer setting while doing the setting, press CLEAR on the remote commander or press PROGRAM + and – on the VCR at the same time. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ?/1. The t indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter. • Display tape information on the TV screen. • Check the timer settings. • Watch another TV programme. To watch the recorded programme right after the Easy Timer recording The SEARCH indicator starts flashing when the VCR finishes the Easy Timer recording. To watch the recorded programme, press the EASY TIMER knob. The VCR turns on, starts searching, then automatically starts playback from the beginning of the recording. For details, see page 41. Basic Operations Tips • (SLV-ED85PS/TH) To record from a source connected to LINE-1 IN jacks, press INPUT SELECT or PROG +/– or turn the EASY TIMER knob to display “L” in the display window. • (SLV-ED55PS) To record from a source connected to LINE-1 IN or LINE-2 IN jacks, press INPUT SELECT or PROG +/– or turn the EASY TIMER knob to display “L1” or “L2” in the display window. • To record NTSC signals, set the tape speed to SP or EP. To set to the EP mode, display “LP” in the display window. Notes • You cannot set the Easy Timer if eight programmes have already been set. • You can set the timer for only one programme using the Easy Timer function. If you want to set the timer for other programmes, use the TIMER SET/CHECK menu. For details, se...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :