Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
2. To switch off the intensive setting, press the – button. . Automatic mode has been switched on again. Switching over to manual mode: . To switch from automatic mode to manual mode at any time, press the U button. Intermittent ventilation . Used for ventilating the kitchen at hourly intervals at the lowest fan setting, round the clock. Switching on appliance: Press the button and insert the filter drawer. . The fan runs for 5 minutes at Setting |, then switches off for 55 minutes. This process is repeated every hour. Switching off: Press the button. Operating the extractor hood Switching off: There are 2 different methods of switching off the appliance whether in manual or automatic mode. Switching off directly: Press the Lbutton. Important: All fan functions are switched off. Switching off appliance with fan run-on: Insert filter drawer all the way. The fans operate in the last switched-on stage for around another 10 minutes and then switch off. . If the intensive setting is switched on when the filter drawer is inserted, the intensive setting automatically switches back during run-on. . If intermittent ventilation is switched on, it continues operating normally following run-on. Light . The light can be used at any time, even when the appliance has been switched off. Switching on/off: Press the a button. Adjusting the brightness: . Hold down the a button until the desired brightness is obtained. Special functions Switching on the light automatically, e.g. via a timer: . Fan and light must be switched off. Switching on: Simultaneously press the a and L buttons. . After approx. 3 seconds the light switches on to acknowledge the setting. Switching off: Repeat the process with the light switched on. . After approx. 3 seconds the light switches off to acknowledge the setting. Adjusting the sensitivity of the sensor control: 1. Press and hold down the automatic button. 2. To display the current sensitivity, press the + or – button. 3. You can now change the sensitivity of the sensor control by pressing the + or – button. . Factory setting: @. . Lowest setting: {. . Highest setting: O. 24 Removing and inserting the metal-mesh grease filters: Warning: The halogen bulbs must be switched off and cool. 1. Pull the filter drawer all the way out. 2. Depress both catches at the front of the grease filter and remove the grease filter. 4. Clean the filters. 5. Insert the clean filters back into the hood. 6. Cancel the # display. . Press the L button for at least 3 seconds. The # display then goes out. 3. Depress the catches at the rear of the grease filter and remove the grease filter. Grease filters: Metal-mesh filters are used to trap the grease particles in the cooking vapours. The filter mats are made from noncombustible metal. Caution: As the filter becomes more and more saturated with grease, there is an increased risk of fire and the function of the extractor hood may be impaired. Important: By cleaning the metal grease filters at appropriate interval...
Ce manuel est également adapté pour les modèles :Hoods - D4682X0/02 (13.29 mb)
Hoods - D4682X0/03 (13.29 mb)
Hoods - D4682X0/04 (13.29 mb)
Hoods - D4692X0/01 (13.29 mb)