Évaluations - 3, GPA: 3.7
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
It is not a fault. 10 1 Name of parts Notes concerningoperation Control panel Maintenance & cleaning Set up Troubleshooting Safety Safety Control panelMaintenance& cleaningSet up Notes concerningoperation Name of partsTroubleshooting Troubleshooting Name of parts Notes concerningoperation Control panel Maintenance & cleaning Set up TROUBLESHOOTING The refrigerator doesn't work. The plug has not been nicely inserted into the outlet. There are noises in the refrigerator. The things in the refrigerator have not been evenly placed. The refrigerator has not been placed on a rigid and flat surface. The refrigerator is too close to the wall. Something is behind or under the refrigerator. The sound is from the compressor. The front and sides of refrigerator are hot. The frame is equipped with anti-condensation pipe, so the refrigerator will become hot when it is running. It is not a fault. There are radiating devices (condensers) inside both sides of refrigerator. There is frost on the back wall inside the refrigerator. It's normal when the refrigerator is running. It will disappear when the refrigerator stops working. SAFETY Please read this manual. Please read carefully the contents in this manual concerning safety and operation before switching on the power. Please keep this manual. Please keep this manual nicely for your future reference. Please pay attention to warnings. Please pay attention to the warnings on the wine refrigerator concerning operation and follow their instructions. Please follow the instructions in this manual concerningoperation. NAME OF PARTS Top frame Large steel wire rack Small steel wire rack Accessories Model Name Large steel wire RackSmall steel wire rack Lamp Cover Internal lamp RW13EBBB RW13EBSS 5 1 1 1 29 Safety Safety Safety Name of parts Notes concerningoperation Control panel Troubleshooting Set up Maintenance& cleaning NOTES CONCERNING OPERATION POWER SOURCE Do not use a damaged plug. Do not pull the plug. Do not touch the plug when your hands are wet. The plug should not be over-bent or pressed under a heavy thing. Please remove the plug from the outlet when there are thunders and lightning or the refrigerator is not to be used for a long time. The refrigerator should not share the outlet with other appliances, otherwise electric shock and fire may happen. Check the voltage of refrigerator if it is in conformity with that of outlet before plugging. The permissible voltage range is 98-143V. If the voltage of your power source is not in this range, you have to use a 500W automatic regulator, which can easily be found on the market. The extension of power line is not recommended. If you want to use a connection plate, it should be in line with the capacity of refrigerator and nicely grounded. The connection plate should be hung up or put at a place more than 200mm far from the refrigerator. If the supply cord is damaged,it must be replaced by manufacturer, retailer it s service agent or similar qualified person in order to avoida hazard. ATTENTION Please do not put your hands under the refrigerator. Do not put cigarette butts or candles on the refrigerator. The refrigerator should be far away from any heat source. Please do not put heavy things on the refrigerator. CLEANING Do not clean the refrigerator with water or chemicals. If there is dirt on the plug, please use it after cleaning. Please wait 5 minutes when you want to insert the plug into the outlet again after it was removed. SET UP Please read the following section carefully to avoid any injury of personnel and damage of property. Place the refrigerator on a rigid and horizontal surface and flat it with the adjusting foot. The refrigerator should be put in a place with good ventilation. Thereshould be a distance of over 5cm to both sides and the rear and over 10cm to the top. Do not place the refrigerator in a place with direct sunshine or near the heat source (such as gas stove and oven) or in a damp place. The refrigerator should be put in a place near the outlet. Please use a separate 220~240V outlet for the refrigerator. The refrigerator should be nicely grounded. Do not ground it through phone line or gas pipe. The replacement of power line needs special tools, so please contact the service center if your power line is damaged. Noises will arise when something is beside, behind or on the refrigerator. The ambient temperature should be over 5 , otherwise the refrigerator may freeze up. ATTENTION The refrigerator must be correctly grounded, otherwise incident may happen. Do not put the refrigerator upside down or transversely. The slope between the refrigerator and the floor should never be more than 45 . 8 Name of parts Notes concerningoperation Control panel TroubleshootingMaintenance & cleaning Set up 3 Safety Safety Safety Name of parts Notes concerningoperation Control panel Troubleshooting Set up Maintenance& cleaning 6. RESET MODE 6-1 If you press the white wine key and the red wine key simultaneously, all indic...