653/2, 653/3 29 2610998 115 Baffle 24 653/2 2915 011 007 Nut 89 30 3 602 391 503 Rubber Buffer {2} 66 653/3 1 613 480 007 Wing Screw 89 34 2610998132 Spacer 82 810 2 604 321 914 Brush Set 26 35 2 610 346 444 Reversing Screw LH 85 825 2610998 144 Gear Housing Assembly 72 36 2 610 906 123 1/2" Keyed Chuck 91 w/pos. 49 37 2 914 411 045 Screw {2} 89 828 2 610 998 153 Intermediate Plate Assy. 38 38 2910 615022 Screw {3} 89 w/pos. 49, 51 40 2610998138 Cable 10 842 2 610 907 368 Spindle

Standards by Underwriters Laboratories. This symbol designates that this tool complies to NOM Mexican Standards. -5 Functional Description and Specifications !WARNING Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally. Drills TRIGGER MOTOR HOUSING CHUCK HIP CLIP REVERSING SWITCH BUTTON AIR VENTS “LOCK-ON” BUTTON FIG. 1 MAXIMUM CAPACITIES Model No. Chuck Size a

Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repai

The tool speed can be controlled from minimum to maximum nameplate rated RPM by the pressure you apply to the trigger. Apply more pressure to increase the speed and release pressure to decrease speed (Fig. 1). "LOCK-ON" BUTTON The "Lock-ON" button, located in the handle of your tool allows for continuous operation at maximum RPM without holding the trigger. TO LOCK TRIGGER "ON": squeeze trigger, depress button and release trigger. TO UNLOCK THE TRIGGER: squeeze trigger and release it without dep

Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area When operating a power tool outside, use an outdoor extension cord marked "W-A" Keep your work area clean and well lit. or "W." These cords are rated for outdoor use Cluttered benches and dark areas invite and reduce the risk of electric shock. Refer to accidents. “Recommended sizes of Extension Cords” in Do not operate power tools in explosive the

lead to potential injury. TO LOCK TOOL “ON”: turn the selector dial VARIABLE SPEED DIAL to the Hammering Only mode and squeeze Your tool is equipped with a variable speed the trigger switch until it locks. dial. The speed and impact force can be TO TURN TOOL: “OFF“ press the trigger adjusted by rotating the dial. Higher speeds release switch and the trigger will return to and impact force work best for faster the “OFF” position automatically. penetration when drilling or chiseling in hard To inc

Such preventive safety measures reduce the risk of starting the tool accidentally. Rotary Hammer SELECTOR LEVER RELEASE BUTTON TRIGGER SWITCH DUST SHIELD LOCKING SLEEVE VENTILATION OPENINGS AUXILIARY HANDLE VARIABLE SPEED DIAL SERVICE REMINDER LIGHT FIG. 1 VENTILATION OPENINGS HAND GRIP Model number Shank style 11245EVS SDS Max Maximum Capacities: Carbide tipped bits Thin wall core bits 2” 6” NOTE: For tool specifications refer to the nameplate on your tool. -6 BM 1619929472 2-05 2/17/05 11:52 P

POWER INDICATOR LIGHT Model number 11241EVS 11248EVS Shank style SDS Max Spline Maximum Capacities: Carbide tipped bits 1 9/16" 1 9/16" Thick wall core bits 4" 4" SPLINE TOOL HOLDER (Model 11248 only) FIG. 1 BM 1619929548 2/03 2/12/03 12:37 PM Page 6 BM 1619929548 2/03 2/12/03 12:37 PM Page 7 Operating Instructions INSTALLING ACCESSORIES Clean the insert shank end of the accessory to remove any debris, then lightly grease with a light oil or lubricant. Insert accessory into the tool holder, whil