Évaluations - 4, GPA: 4.3 ( )

Fabricant : Superior Taille : 598.98 kb Nom Fichier : Lennox_Hearth_CF_Installation_904538.pdf Langue d'enseignement:

IMPORTANT: THE INSTALLATION MUST CONFORM WITH LOCAL CODES OR, IN THE ABSENCE OF LOCAL CODES WITH THE NATIONAL FUEL GAS CODE, ANSI Z223.1. • Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies. • • • Young children should be carefully supervised when they are in the same room with the appliance. • Do not place clothing or other flammable material on or near the appliance. • Never operate this appliance without first ensuring that the glass enclosure panel is securely in place. • Do not burn solid fuels in this listed unvented gas room heater. • Installation and repair should only be completed by a qualified service person. The appliance should be inspected before use and at least annually by a professional service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is important that control compartments, burners and circulating air passageways of the appliance be kept clean. • Allow the appliance to cool before servicing. Always shut off the gas to the appliance while performing service work. • Do not install these appliances in a bedroom or bathroom as all units exceed maximum allowable BTU/hr input of 10,000. • The appliance and its individual shut-off valve must be disconnected from the gas supply piping system while performing any tests of the gas supply piping system at pressures in excess of ... psig. • The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ... psig. • Keep appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids. • Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water. • Operation of these catalytic systems at altitude will result in sporadic nuisance outages of the pilot system due to lack of sufficient oxygen, increasing in frequency as the altitude increases above 4,500 feet. Although this situation is not dangerous, pilot outages cannot be tolerated. • These catalytic appliances are rated for use at altitudes no greater than 5,500 feet. Do not install and use this appliance in locations in excess of this altitude. • Ensure that the appliance is clean when operating. Excessive dust accumulation on the burner and logs will increase the amount of carbon monoxide formation and could lead to carbon monoxide poisoning and death. • Provide adequate clearances around air openings and adequate accessibility clearance for service and proper operation. Never obstruct the front openings of the appliance. • These appliances are designed to operate on natural or propane gas only. The use of other fuels will degrade the performance of this system and may be dangerous. • Do not tamper with the appliance in any way. Any modifications will result in a voided warranty and could result in CO poisoning or death. CODES These appliances comply with American National Safety Standards and are tested and listed by IAS Services to AGA/ANSI Z21.11.2b1995 as an “Unvented Room Heater.” Adhere to all local codes or in their absence the latest edition of The National Fuel Gas Code ANSI Z223.1 or NFPA54 which can be obtained from The American National Standards Institute, Inc. (1430 Broadway, New York, NY, 10018) or National Fire Protection Association, Inc. (Batterymarch Park, Quincy, MA, 02269). All electrical...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :