Log:
Évaluations - , GPA: ( )

Instructions HP, Modèle HP Integrity NonStop H-Series

Fabricant : HP
Taille : 99.2 kb
Nom Fichier :

Langue d'enseignement: en

Le document est chargé, s'il vous plaît patienter
Téléchargez votre Fermer
Le document est chargé, s'il vous plaît patienter
Téléchargez votre Fermer


Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


NSPDIAG Operation
Option G – Copy Test Commands From Data File
into Memory
Option G – Copy Test Commands From Data File into Memory
When -G is selected, the option of ‘copy test commands from data file into memory’ is
toggled. The default is off, don’t copy the test commands into memory.
Option G Off: NSPDIAG opens the data file, reads the first test command from the data
file, and sends it to the device; then reads the next test command and sends it to the
device. This process continues until the end of file is reached.
Option G On: NSPDIAG opens the data file, copies test commands from the data file
into memory. It sends the first test command to the device; then reads the next test
command and sends it to the device. This process continues until the end of file is
reached.
There is a limit on the total character count for the commands being copied into
memory from the data file. The maximum character count is 9,999, not including the
blank line and * comment. A line terminator for each data line is included in the count.
When the maximum character count is exceeded, an error message appears and the
test commands are not processed.
Only the data file can be specified when this option is set to On – not the batch file. If
Option B – Batch File Name was used to specify a batch file name prior to setting this
option, the batch file name is deleted.
Option H – Handle Device
and are usually appended to the end of a response from a device. The
default is I, ignoring . The option to append a CR/LF to a response is
configured in the NSP using Command 101. For example <101#023D#>.
The expected response read from the data file cannot have CR/LF at the end of the
response, or it will not match. Option -H allows the user to select the following options
to handle this condition.
N (NORMAL)
- Do nothing.
I (IGNORE)
- When exists in the actual response, erase them.
R (REQUIRED)
- Add to the end of the expected response.
For example, when CR/LF are appended to the end of a response and the value for
option-H is N (no change), they do not match.
Expected Response: <00#000070#test#>
Actual Response:
<00#000070#test#>
When the value for option -H is I, at the end of response is erased before
comparing, and they will match.
When the value for option -H is R, are added to the end of response, and
they will match.
When the current selection is I and -H is selected, the following message is displayed:
NSPDIAG User Guide — 529007-002
1-12

...

Ce manuel est également adapté pour les modèles :
Ordinateurs - HP NonStop G-Series (99.2 kb)
Ordinateurs - HP NonStop L-Series (99.2 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories