Évaluations - , GPA: ( )

Instructions Admiral, Modèle AAW-12CR1FHUE

Fabricant : Admiral
Taille : 5.16 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

In the FAN ONLY Mode, Room Temperature display range is from 0 (32 ) to 38 (99 ). Room Temperature below 32 ,the Temperature display L0. Room Temperature above 99 ,the Temperature display H1. NOTE: Temperature setting range is from 19 (66 ) to 31 (88 ). Fan Speed button Used to select fan speed in sequence auto, low, medium and high. Timer button Used to set or cancel timer operation. When the unit is in operation, you can set OFF TIMER.When the unit is off, you can set ON TIMER.Timer setting range is 0 to 24 hours. If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only 12 seconds, then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER will be cancelled. ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel ON TIMER, press TIMER button. Used to set room temperature in COOLING mode or used to set time in TIMER mode. two keys are pressed at the same time,the temperature LED display will alternate between and . Button Electronic Control Panel Model Heating Fan Speed Mode Timer Airconditioner 14 OPERATING INSTRUCTIONS .ELECTRONIC CONTROL PANEL MODEL NOTE: After setting the mode, allow three (3) minutes before switching to another mode. In the FAN ONLY Mode, Room Temperature display range is from 0°C (32°F) to 38°C (99°F). Room Temperature below 32°F, the Temperature display L0. Room Temperature above 99°F, the Temperature display H1. If the OFF TIMER is set, the time LED displays the remaining time to turn off the unit for only 12 seconds, then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER will be cancelled. If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel TIMER button. Used to set room temperature in COOLING mode or used to set time in TIMER mode. If the two keys are pressed at the same time, the temperature LED display will alternate between °C and °F. NOTE: Temperature setting range is from 19°C (66°F) to 31°C (88°F). WAC 8-24 USER MAN FINAL 3/2/05 12:13 PM Page 16 Saver Mid Mode Auto High Low Timer 2 1 2 3 8 9 8 7 3 5 6 4 1 BUTTON Mode BUTTON Timer BUTTON The appliance will be started when it is energized or will be stopped when it is in operation, if you press this button. Used to select the operation mode. Used to set or cancel timer operation. Remote control Indication symbols of LCD on remote control: 4 High BUTTON Used to select the high fan speed mode. 5 Mid BUTTON Used to select the Mid fan speed mode. 6 Low BUTTON Used to select the Low fan speed mode. 7 Auto BUTTON Used to select the Auto fan speed mode. 9 Saver BUTTON Used to select the Energy-saving mode. The Above symbols are shown when the relevant mode is in use. Auto fan speed Low fan speed Medium fan speed High fan speed Signal transmit Cooling Fan only Energy-saving When Changing modes during operation, sometimes the unit does not alw...