Log:
Téléchargements : 0   Taille : 197 kb   Fabricant : Epson  
Catégorie : Jig Saw et
@name

Fig. 11 A B Fig. 12 C D Fig. 13 E Fig. 14 5. Use the two nuts and lockwashers (E) Fig. 14, removed in STEP 3, to fasten the switch box to the bandsaw arm (Fig. 14). 7 6. Remove the screw and cable clamp (E) Figs. 15 and 16 from the lower arm of the band saw. E Fig. 15 E F Fig. 16 7. Insert the switch cord (F) Fig. 16, into the clamp (E) (removed in STEP 6), and fasten the switch cord (F) to the bandsaw. IMPORTANT: Be certain to prevent contact between the on/off switch-to-motor cord (F) Fig. 16

Téléchargements : 1   Taille : 864 kb   Fabricant : Epson  
Catégorie : Jig Saw et
@name

For Parts, Service, Warranty or other Assistance, please call 1-888-848-5175 (In Canada call 1-800-463-3582). 10" Compound Power Miter Saw (Model 36-075) PART NO. 899908-0010 Copyright © 2000 Delta Machinery ESPANOL: PAGINA 21 To learn more about DELTA MACHINERY visit our website at: For Parts, Service, Warranty or other Assistance, please call 1-888-848-5175 (In Canada call 1-800-463-3582). SAFETY RULES Woodworking can be dangerous if safe and proper operating procedures are not followed. As wi

Téléchargements : 0   Taille : 4 mb   Fabricant : Epson  
Catégorie : Jig Saw et
@name

This machine is equipped with an electric cord having an equipment- grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician. Improper connection of the equipment-grounding conductor can result in risk of electric shock. The conductor with insulation

Téléchargements : 0   Taille : 1 mb   Fabricant : Epson  
Catégorie : Jig Saw et
@name@name@name

When using and extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord. MINIMUM GAUGE FOR CORD SETS Volts Total Length of Cord in Feet 120V 0-25 26-50 51-100 101-150 240V 0

Téléchargements : 2   Taille : 2 mb   Fabricant : Epson  
Catégorie : Jig Saw et
@name@name@name

B Copyright © 2006, 2008 Delta Machinery TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS....................2 SAFETY gUIdELINES - dEFINITIONS.....................3 gENERAL SAFETY RULES .......................................4 AddITIONAL SPECIFIC SAFETY RULES ................5 FUNCTIONAL dESCRIPTION ...................................7 CARTON CONTENTS ...............................................7 ASSEMBLY .................................................................10 OPE

Téléchargements : 6   Taille : 701 kb   Fabricant : Epson  
Catégorie : Jig Saw et
@name@name@name

• Keep hands away from moving parts. Never place your hands near the cutting area. • Keep hands away from cutting area. When sawing, never reach underneath or behind the material being cut for any reason. • Never hold work in your hand, lap or against parts of your body when sawing. The saw my slip and the blade could contact the body causing injury. • Use extra caution when cutting overhead and pay particular attention to overhead wires which may be hidden from view. Anticipate the path of fall

Téléchargements : 0   Taille : 1 mb   Fabricant : Epson  
Catégorie : Jig Saw et
@name@name@name

Worn blades may also have insufficient body clearance which increases the chance of binding and increased loading. 6. LIFTING THE SAW WHEN MAKING BEVEL CUTS Bevel cuts require special operator attention to proper cutting techniques - especially guidance of the saw. Both blade angle to the shoe and greater blade surface in the material increase the chance for binding and misalignment (twist) to occur. 7. RESTARTING A CUT WITH THE BLADE TEETH JAMMED AGAINST THE MATERIAL The saw should be brought u

Téléchargements : 4   Taille : 17 kb   Fabricant : Epson  
Catégorie : Jig Saw et
@name@name

Asegurese que las lenguetas encajen bien en las aberturas. NO monte la sierra sobre la base en ninguna otra direccion. • Asegure la sierra a la base con pernos de 1/4” x 1-1/2” en las cuatro esquinas. ||SYMBOL| PRECAUCION: Asegurese que la sierra este firmemente montada sobre la base antes de usarla. PARA CERRAR LA BASE DE LA SIERRA DE BANCO • Quite los cuatro pernos, levante la sierra de banco de la base. • Levante la base por los rieles superiores y cierrela PRECAUCION: Asegurese que la sierra

Téléchargements : 1   Taille : 1 mb   Fabricant : Epson  
Catégorie : Jig Saw et
@name@name@name

390268-00 DW746 Copyright © 2000 Before returning this product call 1-800-4-DEWALT IF YOU SHOULD PURCHASE, CALL 1-800- IN MOST CASES, REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER IF YOU HAVE A SUGGESTION OR GIVE US A CALL. YOUR FEEDBACK IS VITAL TO THE SUCCESS OF DEWALT'S QUALITY IMPROVEMENT PROGRAM. See our catalog on the Wide Web. INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA INSTRUCTION MANUAL DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. SI TIENE DUDAS,

Téléchargements : 8   Taille : 1 mb   Fabricant : Epson  
Catégorie : Jig Saw et
@name@name@name

392261-00 DW7464 Copyright © 2002 Before returning this product call 1-800-4-DEWALT IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR DEWALT PURCHASE, CALL 1-800-4 DEWALT. IN MOST CASES, A DEWALT REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TOTHE SUCCESS OF DEWALT'S QUALITY IMPROVEMENT PROGRAM. See our catalog on the World Wide Web. INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA INSTRUCTION MANUAL DE GARANT





catégories