The rebound position should be a minimum of 1/2” from where the rebound stops. Note: Highest height cannot be fully extended, as this will generate a rough ride and may damage the dampers. This small gap is also required to allow for a tolerance as the suspension height is controlled by the ECU. Without this small tolerance, the ECU may not achieve the highest height if the suspension is stopped before the ECU believes the highest vehicle height is reached. When the vehicle is at the rebound hei

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i LIMITATION OF LIABILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i SYSTEM COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 HEIGHT SENSOR INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 PROGRAMMING THE SYSTEM . . . . . .