1. Before running the self test, make sure there is sufficient paper to run the test (18" [46 cm]); the paper cover is closed; and that the printer is switched OFF. 2. Press and hold down the FEED pushbutton; then switch ON the printer to begin the test. Note: The test can be aborted by switching OFF the printer. 3. The following typical information is printed, followed by the printer’scomplete character set: Version : 1.1.6 Data bit : 8 bit Parity : None Baud rate : 9600 bps Handshaking : DTR C
. . . . . . . . . . . . . . . .5Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Set-Up Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Using the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Maintenance. . . . . . . . . . . . . . . .