Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
• Aim the camera as instructed by the text that appears in the projection area. • When the document camera is positioned correctly, position adjustment will end and the dialog box will close. At this time the monitor screen (the image being picked up by the document camera) will be projected. 52 To rotate the currently projected image Note This operation will affect only the image that is currently being projected. The projection image produced the next time you release the shutter will be projected in accordance with the settings on the YC Camera Application Setup Menu (page 55). 1 1 Press the [FUNC] key to display the YC Camera application function menu. 2 2 Use the [..] key to move the highlighting to “Rotate Right” and then press the [ENTER] key. • This will rotate the projected image 90 degrees to the right. • Instead of steps 1 and 2 above, you can also rotate the projected image by pressing the [ ] key. To perform white enhancement on the currently projected image Note • White enhancement causes the background of the projected image to be white enhanced, which helps to make the text on a document easier to read. • This operation will affect only the image that is currently being projected. The projection image produced the next time you release the shutter will be projected in accordance with the settings on the YC Camera Application Setup Menu (page 55). Important! You can perform white balance only on a projected image that has been skew corrected. For more information, see the note under “To perform manual skew correction on the currently projected image” (page 54). 1 1 Press the [FUNC] key to display the YC Camera application function menu. 2 2 Use the [..] key to move the highlighting to “Enhance White” and then press the [ENTER] key. • This will enhance the white of the projected image. • Instead of steps 1 and 2 above, you can also white enhance the projected image by pressing the [..] key. 53 To perform manual skew correction on the currently projected image Note • Skew correction automatically straightens the image of a document that is misaligned on the document stage of the document camera. Under its initial defaults, the YC Camera application is configured to perform skew correction automatically. You can also turn off auto skew correction. If you do, you can use the following procedure to adjust image alignment manually. • This operation will affect only the image that is currently being projected. The projection image produced the next time you release the shutter will be projected in accordance with the settings on the YC Camera Application Setup Menu (page 55). 1 1 Press the [FUNC] key to display the YC Camera application function menu. 2 2 Use the [..] key to move the highlighting to “Skew Correction” and then press the [ENTER] key. • This will straighten the projected image. • Instead of steps 1 and 2 above, you can also perform skew correction of the projected image by pressing the [..] key. 54 Configuring YC Camera Application Setup Menu Settings You can use the YC Camera setup menu to configure various YC Camera application operation settings. 2 2 1 1 To configure YC Camera application setup menu settings Press the [MENU] key to display the setup menu. Press the [..] key to move the highlighting to “USB” and then press the [ENTER] key. 3 3 Press the [..] key once to move the highlighting to “Setup” and then press the [ENTER] key. • This will display the YC Camera application setup menu. 5 5 4 4 Use [..] and [..] to select the menu item whose setting you want to change. Press the [..] or [..] key to select the setting you want (so its button is 7 7 6 6 ). Repeat steps 4 and 5 to configure other settings, if you want. After you are finished, press the [ESC] key to exit the setup menu. Note Anytime you change the “White Enhancement” or “Skew Correction” setting, the new setting goes into effect from the next image you record with the document camera after exiting the setup menu. Other settings go into effect as soon as you exit the setup menu. 55 To restore all settings on the YC Camera application setup menu to their initial factory defaults 1 1 Press the [MENU] key to display the setup menu. 2 2 Press the [..] key to move the highlighting to “USB” and then press the [ENTER] key. 3 3 Press the [..] key once to move the highlighting to “Setup” and then press the [ENTER] key. • This will display the YC Camera application setup menu. 4 4 Press the [..] key to move the highlighting to “Initialize YC Camera Setup” and then press the [ENTER] key. • This displays the dialog box shown below. 6 6 5 5 Use the [..] key to select “Yes”. To restore all the settings to their initial defaults, press the [ENTER] key. • To exit the operation without doing anything, press [ESC] instead of [ENTER]. 7 7 After you are finished, press the [ESC] key to exit the setup menu. 56 YC Camera Application Setup Menu Contents This section provides detailed explanations of all of the items included on the YC Camer...
Ce manuel est également adapté pour les modèles :Projecteurs - XJ-S32 (5.27 mb)
Projecteurs - S37 (5.27 mb)
Projecteurs - S42 (5.27 mb)
Projecteurs - S47 (5.27 mb)