Évaluations - 5, GPA: 3.8 ( )

Fabricant : Casio Taille : 5.27 mb Nom Fichier : Langue d'enseignement:

• How to use the bundled EZ-Converter PRO and EZ-Converter 1.1 software to save image files to a USB memory device or memory card • How to use the Data Projector Viewer to play back image and/or movie files that have been saved to a USB memory device or memory card Important! In order to perform the procedures in this section, you will first need to install the software from the bundled CD-ROM onto your computer. For more information, see “Installing Data Projector Software” (page 10). Supported USB Memory Devices The Data Projector supports connection of the following types of FAT/FAT32 format USB memory devices. • USB memory • USB Mass Storage Class compatible digital cameras For details about supported USB memory devices (products whose operation has been confirmed), see the CASIO website at Connecting a commercially available USB card reader to the Data Projector makes it possible to handle data on memory cards supported by the reader the same way as USB memory device data. For details about supported USB card readers, see the CASIO website. 13 Supported Playback Data Types The data types listed below can be played back using the Data Projector’s Viewer. Image Files Playback is supported JPEG (jpg, jpeg, jpe; excluding progressive format) format or BMP (bmp) format image files up to 6 Mbytes in size. Movie Files Playback is supported for the following movie file formats. • MPEG-4 Type avi Format Movie Files Recorded on a CASIO Digital Camera Applicable Models: See the CASIO website at Applicable Recording Modes: Fine Mode (640 . 480, 30fps, up to 15MB), Normal Mode (640 . 480, 30fps, up to 15MB), Long Play Mode (320 . 240, 15fps) Applicable Audio Format: wav • Motion JPEG Type avi Format Movie Files Recorded on a CASIO Digital Camera Applicable Models: See the CASIO website at Applicable Recording Modes: Long Play Mode (320 . 240, 15fps) Applicable Audio Format: wav • mp4 Format Movie Files Converted Using Computer Software Applicable Formats: VGA (640 . 480) size (25fps maximum when less than 15MB, 15fps maximum for 15MB or greater recommended), QVGA (320 . 240) size (15fps maximum recommended) Applicable Audio Format: AAC Preparing a Presentation by Saving Image Files to a Memory Device or Memory Card In order to use a USB memory device or memory card for a presentation, you must first save the image files to the applicable media. The software that comes with the Data Projector helps to simplify the presentation preparation procedure. You can use EZ-Converter PRO to convert files (PowerPoint, PDF, etc.) that are on your computer’s hard disk to image files, and save the image files to a USB memory device or memory card. With EZ-Converter 1.1, you can rearrange the projection sequence of image files, and convert images to monochrome negative to make them easier to view when projecting onto a blackboard. Using EZ-Converter PRO EZ-Converter PRO is software that converts computer files to JPEG image files that can be used in presentations. You can convert a file using the print function of the application used to create the file. CASIO EZ-Converter PRO 0 14 Important! Operation of EZ-Converter PRO has been verified for the following applications. No guarantees are made concerning operation with any particular application. • Word 2000 / 2002 / 2003 / 2007 • Excel 2000 / 2002 / 2003 / 2007 • PowerPoint 2000 / 2002 / 2003 / 2007 • Adobe Reader / Acrobat Version 6 / 7 / 8 • WordPad Version 5 / 6 To convert a document to an image file 1 1 Using the appropriate application, open the document that you want to convert to an image. 2 2 Perform the required procedure in the application you are using to launch a print operation. • This will display a dialog box for configuring print settings. The sample below shows the dialog box for a document opened with WordPad. 3 3 Depending on the application you used to open the document, perform one of the following operations. • WordPad, etc.: Use “Select Printer” to select “CASIO EZ-Converter PRO”. • Adobe Reader, PowerPoint, Word, etc.: In the “Printer” group, click the “Name” down arrow button and then select “CASIO EZ-Converter PRO” from the menu that appears. Note Steps 4 through 6 are required only if you want to change the output image file size and resolution settings from their initial defaults (Size: 1024 . 768, Resolution: Standard). If you want to use the initial default settings without changing them, skip these steps and jump to step 7. 15 4 4 Click the [Properties] button or [Preferences] button. • This will display the CASIO EZ-Converter PRO Properties dialog box or a printer setup dialog box. Actual button names and dialog box names depend on the application you are using. 5 5 Configure the output image file size and resolution settings. • To specify the size, click the image size down arrow button and then select the image...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :