Log:
Trier : Nom ↑   Téléchargements   Évaluation   Taille ↑  
Téléchargements : 5   Taille : 876 kb   Fabricant : HP  
Catégorie : Aspirateurs
@name

Interim Cleaning Method: Machine operates at faster set speed for routine light cleaning. The interim cleaning method will be ineffective if the restorative cleaning method is not performed on a regular basis. 5. Rotate control grips completely forward to begin cleaning (Figure 12). WARNING: Flammable materials or reactive metals can cause explosion or fire. Do not pick up. NOTE: Machine travel speed for the cleaning modes are set speeds. FIG. 12 6. View brush pressure meter while operating. Met

Téléchargements : 6   Taille : 876 kb   Fabricant : HP  
Catégorie : Aspirateurs
@name

Pac Operator and Parts Manual NOBLES 12875 RANSOM STREET HOLLAND MI 49424 U.S.A. CUSTOMER SERVICE: 1-800-365-6625 608416 FAX: 1–800–678–4240 OUTSIDE U.S. : 1–616–786–2330 Rev. 00 (01-00) (Next) Next (Prev.) Prev. (Go To..) Go To.. (Find...) Find... (Home) Home OPERATION This manual is furnished with each new model. It provides necessary operation and machine maintenance instructions and an illustrated parts list. Read this manual completely and understand the machine before operating or servicin

Téléchargements : 0   Taille : 876 kb   Fabricant : HP  
Catégorie : Aspirateurs
@name

. 4. 13073. BREAKER, CIRCUIT BRUSH 10 AM. . 4. 14088. SCREW, 10-24X3/. . 5. 231058.B. PLATE, CIRCUI. . 12024. DECAL, CIRCUIT BREAKER (NOT SHOWN. . 5. 60096. CABLE, RE. . 5. 60097. CABLE, BLAC. . 5. 10070. BOX, BATTER. . 5. 46976086. CHARGER, BATTERY (120V. . 60059. CHARGER, BATTERY (230V. . 5. 14053. NUT, KE. . . ASSEMBL. . INCLUDED IN ASSEMBL. (Home) Home (Find...) Find... (Go To..) Go To.. (Prev.) Prev. (Next) Next Concorde HP Plus (01–00) PARTS LIST 24 Concorde HP Plus (01–00) CONTROL CONSOLE

Téléchargements : 5   Taille : 876 kb   Fabricant : HP  
Catégorie : Aspirateurs
@name

7. Reset main circuit breaker button. BRUSH BELT MAINTENANCE Brush belt can wear prematurely if belt tension is not correct. If belt flexes more than 12.7 mm (0.50 in) from center, belt should be tightened. FOR SAFETY: Before leaving or servicing machine, stop on level surface, turn off machine and pull out main circuit breaker button. To Tighten Or Replace Brush Belt: 1. Pull out main circuit breaker button to shut off power to machine (Figure 29). 2. Remove belt guard, two screws (Figure 31).





catégories