Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Table 9 HP-UX 11i v2 December 2005 Fixes (continued)
Defect ID
Description
SR: 8606414166
Concurrent BDRs issued to the same device when both BDRs failed, the application that
issued the commands hangs instead of timing out. Single BDRs repeatedly timed out due
to a timer reset issue. Both of these have been corrected by changing the way that a failed
BDR request is retried.
SR: 8606414869
A turbulent link may result in I/O hang in the fibre channel controller firmware which
triggers an I/O timeout fatal error processing in the fibre channel driver. The fibre channel
controller firmware was modified to notify the driver once when multiple unsuccessful LIP
(Loop Initialization Primitive) sequences occur. This would help the driver to flow control
the I/Os and also to abort any I/Os that are already posted to the controller firmware, if the
LIP storm persists for over 10 seconds.
Table 10 HP-UX 11i v2 March 2005 Fixes
Defect ID
Description
SR: 8606388386
DMA related changes are needed in the driver for non- HP platform support
SR: 8606388337
Data corruption with A6826A and AB465A on rx1620
SR: 8606377181
The fcd driver can now report when an unrecoverable hardware error occurs
SR: 8606380621
Calling HBA_SendCTPassThru() with a large ReqBufferSize may cause a panic
SR: 8606381090
HBA_GetFcpTargetMapping() can affect normal access to tape
SR: 8606390263
VxVM interoperability issue with the fcd driver, due to first open time of 30 sec. or more
SR: 8606381439
Enhancement Request of fcmsutil(1M) for the A6826A PCI-X Dual Port Fibre Channel
adapter
SR: 8606382677
Uncompressed Full Dump Save Failure
SR: 8606389639
FC10 may not be detected on boot-up ioscan
SR: 8606384254
Superdome running 11.23PI with 1 TB memory could not do a full dump
SR: 8606390267
vgexport/vgimport commands hang - timeout function is needed
SR: 8606392115
“CLAIMED” message and ioscan description string should indicate HBA product number
SR: 8606391884
Incorrect information in the fcdlist man page
SR: 8606392547
set_int_delay command does not display any message when command is successful
SR: 8606392748
fcmsutil: does not check to discover if too many parameters have been given
SR: 8606395620
The vgcfgbackup command hangs with the fcd driver
SR: 8606395543
A6826A HBA is not coming online when connected to an 8 port Brocade switch
SR: 8606369480
The fcd driver is not seeing devices through the Cisco MDS 9000 family of switches
SR: 8606394349
SAN configuration changes might lead to boot failure from devices seen by the fcd driver.
Table 11 HP-UX 11i v2 September 2004 Fixes
Defect ID
Description
SR: 8606346794
SNIA HBA API GetPortStatistics() returns HBA_STATUS_ERROR
SR: 8606348536
Under heavy IO load ioscan display LUNs behind certain devices as NO_HW
SR: 8606351283
HP-UX Start-up status no longer fits on standard 80x24 console
SR: 8606356804
Miscellaneous Fixes in IO path
Defect Fixes
7
... Ce manuel est également adapté pour les modèles :
Matériel de réseau - HP-UX 11i v2 I/O Cards (311.5 kb)