Log:
Téléchargements : 13   Taille : 686 kb   Fabricant : Southbend  
Catégorie : Machines-outils
@name

• Secure Clamping: A thrown workpiece may cause severe injury or even death. When swapping the chuck jaw positions, use a torque wrench to re-torque the M8-1.25 jaw mounting cap screws to 29 ft/lbs. When clamping a workpiece, maximum gripping force is attained at full jaw and scroll gear engagement. If the jaw and scroll gear are partially engaged, clamping force is reduced. • Chuck Speed Rating: Exceeding the maximum rated speed indicated on the chuck, or using excessive spindle speeds with an

Téléchargements : 9   Taille : 715 kb   Fabricant : Southbend  
Catégorie : Machines-outils
@name

Ignoring this warning can lead to a severe crushing injury or finger amputation! Figure 1. Features. Manufactured with high-tech German CNC machinery. Grease fitting for complete internal lubrication. Universal plain-back mounting. Hardened steel jaws for durability and extreme clamping force and grip. Two-piece jaws for speedy internal/external clamping changes. Designed for up to 2000 RPM. Specifications • OD Clamping Range...0.32"-6.30" (8-160mm) • ID Clamping Range ..2.17"-5.90" (55-150mm) •

Téléchargements : 4   Taille : 1 mb   Fabricant : Southbend  
Catégorie : Machines-outils
@name

Ignoring this warning can lead to a severe crushing injury or finger amputation! Specifications • Fits Lathe Models ..14" x 40" SB1012, SB1013 ................................16" x 60" SB1014, SB1015 ............................... 16" x 40" SB1037, SB1038 • Taper Per Inch Range.............................0–18" • Minor Inch Scale Divisions....................0.010" • Major Inch Scale Divisions....................0.020" • Taper Angle Range .................................0–10° • Minor Taper Sca

Téléchargements : 4   Taille : 1 mb   Fabricant : Southbend  
Catégorie : Machines-outils
@name

Ignoring this warning can lead to a severe crushing injury or finger amputation! Specifications • OD Clamping....... 0.69"–10.04" (17.5–255mm) • ID Clamping........... 3.74"–10.83" (95–275mm) • Chuck Bore Diameter.................2.56" (65mm) • Chuck Outer Diameter...........11.81" (300mm) • Maximum Speed............................2500 RPM* • Mounting Type.......................... D1-8 Camlock • Construction...................Fine-Grain Cast-Iron • Chuck Weight.................................

Téléchargements : 3   Taille : 475 kb   Fabricant : Southbend  
Catégorie : Machines-outils
@name

Before operating your new lathe, you MUST read and understand this insert, the entire Model SB1038 Owner’s Manual, and the Fagor DRO Owner’s Manual to reduce the risk of injury when using this machine. Keep this insert for later reference. If you have any further questions about this manual insert or the differences between the Model SB1038F and the Model SB1038, contact our Technical Support at (360) 734-1639 or email sales@southbendlathe.com. New & Changed Parts 2318 2407 2416 REF PART #

Téléchargements : 5   Taille : 7 mb   Fabricant : Southbend  
Catégorie : Machines-outils
@name

Mounting Dead Center in Spindle 1. DISCONNECT LATHE FROM POWER! 2. Thoroughly clean and dry the tapered mating surfaces of the spindle bore, tapered sleeve, and the center, making sure that no lint or oil remains on the tapers. 3. Insert the center into the sleeve, then insert the sleeve into the spindle bore through the chuck or faceplate. Figure 66 shows an example of the dead center installed in the spindle, using a lathe dog and faceplate for turning between centers. Dead Center Figure 66. E

Téléchargements : 5   Taille : 96 kb   Fabricant : Southbend  
Catégorie : Machines-outils
@name

Box 2027, Bellingham, WA 98227 U.S.A. PHONE: (360) 734-1540 • © South Bend Lathe Co. Model SB1037F 16" x 40" Lathe 220V with DRO Product Dimensions Weight...........................................................................................................................................................3107 lbs. Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 86 x 33 x 60 in. Footprint (Length x Width).........

Téléchargements : 8   Taille : 7 mb   Fabricant : Southbend  
Catégorie : Machines-outils
@name

However, because of the many variables involved with shipping, we recommend that you at least verify the following adjustments to ensure the best possible results from your new machine. Step-by-step instructions for these adjustments can be found on the pages referenced below. Factory adjustments that should be verified: ... ..........................................Page 34). ... ................................................................... adjustment (Page 65). ... .......................

Téléchargements : 3   Taille : 7 mb   Fabricant : Southbend  
Catégorie : Machines-outils
@name

-8 For Machines Mfg. Since 7/09 PREP A R A T I O N EVS Toolroom Lathes Inventory Main Inventory 1: (Figure 2) Qty A. Steady Rest Assembly ....................................1 B. 12" Faceplate w/D1-6 Camlock Stud Set ......1 C. 10" Four-Jaw Chuck w/Combo Jaws .............1 D. Four-Jaw Chuck Key .....................................1 E. Four-Jaw Chuck D1-6 Camlock Stud Set .....1 F. Follow Rest Assembly ....................................1 Tool Box Inventory: (Figure 3) Qty G. Tool Box ........

Téléchargements : 9   Taille : 14 mb   Fabricant : Southbend  
Catégorie : Machines-outils
@name

Except for the differences noted in this insert, all other content in the Model SB1014 Owner’s Manual applies to this machine. Before operating your new lathe, you MUST read and understand this insert, the entire Model SB1014 Owner’s Manual, and the Fagor DRO Owner’s Manual to reduce the risk of injury when using this machine. Keep this insert for later reference. If you have any further questions about this manual insert or the differences between the Model SB1014F and the Model SB1014, contact





catégories