Évaluations - 1, GPA: 4
(
)
)
|
Facilité d'utilisation
Remove tub pump bellows. Remove cap (Remaining Hose.) Disconnect the wiring. Unscrew 2 screws. Remove the pump. Loosen the M6 heater nut to pull out the heater. When mounting the heater, be sure to insert the heater into the heater clip on the bottom of the tub. Pull it out by holding the thermistor bracket. If it is pulled by the wire, it may be broken. When mounting the thermistor again, make sure that it is got back tight to the bushing. HEATER THERMISTOR CAUTION 29 SWITCH ASSEMBLY, DOOR LOCK SWITCH ASSEMBLY, DOOR LOCK Take apart the cabinet cover clamp and release the gasket. Unscrew 2 screws holding the door lock. Disconnect the door lock from the wiring connector. WHEN FOREIGN MATERIAL IS STUCK BETWEEN DRUM AND TUB Remove the heater. Remove the foreign material (wire, coin and others) by inserting a long bar through the hole. 30 31 10-1.THE EXPLODED VIEW OF CABINET ASSEMBLY 10. EXPLODED VIEW A152 A140 A153 A151 A150 A141 A131 A130 A134 A133 A276 A275 A277 A300 A270 A272 A271 A274 A273 A410 A485 A430 A100 A101 A110 A103 A104 A102 A440 A303 A310 A154 32 10-2 THE EXPLODED VIEW OF CONTROL PANEL & DISPENSER ASSEMBLY A450 F215 F110 F210 F225 F300 F120 F220 F432 F170 F160 F430 F441 F462 F322 F321 33 10-3 THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY K311 K131 K130 K136 K135 K411 K410 F464 F320 F310 K140 K510 K346 K344 K342 K520 F468 K340 F466 K111 K110 K141 F467 K530 K330 K332 F461 K611 K610 K105 K310 K320 K121 K122 K221 K220 K212 K210 K125 K115 K540 K550 K333 ...
Ce manuel est également adapté pour les modèles :Rondelles - WD-10480N (1.7 mb)
Rondelles - WD-10480NV (1.7 mb)
Rondelles - WD-10480S (1.7 mb)
Rondelles - WD-10481N (1.7 mb)