Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
•
HP SAN Visibility is a SAN data analysis
NOTE:
tool that securely analyzes your SAN
•
If SAN Connection Manager is not
configuration, providing an automated
installed, see ”Install SAN Connection
inventory process for switches, HBAs, and
Manager” on page 4.
storage systems, including firmware version
•
If SAN Connection Manager is already
verification.
installed, see ”Configure the switch using
8. Click Install.
SAN Connection Manager” on page 6.
The installation progress window appears
briefly, and then the Available Storage
Install SAN Connection Manager
Subsystem dialog box (Figure 2) prompts you to
select the type of HP storage subsystem for this
Follow the instructions in the Read Me First document
station.
to obtain the SCM software, and then install the
management software on your management station,
Figure 2 Available Storage Subsystem dialog
as described in this section. For information on
box
configuring the other servers connected to your
switch, see the HP SAN Connection Manager User
Guide.
To install the SAN Connection Manager software on
your management station:
1.
Follow the instructions in the Read Me First
document to obtain the SCM ISO image.
2.
Open the ISO image file with CD creation
software.
3. Create an SCM installation CD.
4. Insert the installation CD into the CD-ROM drive
of the server.
The HP Installation Wizard starts automatically,
9.
Select one or more storage subsystem types
and the initial installation window opens. (If the
(EVA or MSA) that exist in your SAN by
installer does not start automatically, run
choosing Yes from the drop-down menu for the
Setup.exe from the installation CD.)
appropriate subsystem types. Then, click OK to
5. Click Next.
close this dialog box and continue the
The End User License Agreement (EULA)
installation.
appears.
The progress window monitors the installation. A
6. Read the HP EULA, and click Agree to start the
progress bar shows the percent of the
software installation or click Disagree to cancel
installation completed and icons show the status
the installation.
of each component as it is installed; for
example:
7.
To install all components required for a
management station with EVA storage, MSA
•
A icon indicates successful installation of
storage, or both, select the Management
the component.
Installation option. In addition, you can select
•
A icon indicates a component that has
one or both of the following optional
not been installed or that was skipped
components:
because there is a later version of the
•
HP SAN Designer provides quick and easy
component in the system.
ways to design SANs based on your
•
A icon indicates that an error occurred
specific performance, cost, and future
during installation of this component. The
storage needs. The tool generates a SAN
final wizard window provides additional
topology diagram, a detailed list of
information about component installation
required SAN components, as wel as
errors.
recommendations for planning your future
When the first component, the HP FC Driver, is
growth requirements.
installed, a diagnostic window (Figure 3) shows
the HBA properties and targets found.
Page 4
... Ce manuel est également adapté pour les modèles :
données dispositifs de traitement - HP 8/20q Fibre Channel Switch (761.22 kb)
données dispositifs de traitement - HP 8/20q Fibre Channel Switch/S-Buy (761.22 kb)
données dispositifs de traitement - HP SN6000 Stackable 8Gb 24-port Dual Power Fibre Channel Switch/S-Buy (761.22 kb)
données dispositifs de traitement - HP SN6000 Stackable 8Gb 24-port Single Power Fibre Channel Switch (761.22 kb)