HP StorageWorks ESL E-Series
Replacing the counterweight cable
Counterweight Cable and
You will need the following tool for this procedure:
nl
Ve
• 3/16-inch Allen wrench
To replace the counterweight cable assembly:
nl
rtical Sensor Cable
installation instructions
1. Turn off the library.
2. Unlock and open both front doors of the library.
3. Slide out the lower-left, upper-left, and upper-right bin panels.
Release the latch and pull the handle of the panel until the panel
stops.
This kit contains two parts. The repairs of these two
parts are completely independent; you will not be
replacing them at the same time. Save the part that
you are not replacing should you need it in the future.
11917
4. Set a small, sturdy box on the library floor under the counterweight.
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The box must be able to support 17 lbs (7.7 kg).
First edition: August 2008
TIP:
The information in this document is subject to change without
If you don’t have a box or similar object, you can use two old
notice.
tape cartridges that you are no longer using for data placed
on their sides.
Printed in the US
www.hp.com
AA934-96005
11918
Page 1

---

...

Ce manuel est également adapté pour les modèles :
données dispositifs de traitement - HP ESL 712e Ultrium Tape Library (512.26 kb)
données dispositifs de traitement - HP StorageWorks ESL 286e 286 Slot SDLT Library (512.26 kb)
données dispositifs de traitement - HP StorageWorks ESL 286e SDLT Tape Library (512.26 kb)
données dispositifs de traitement - HP StorageWorks ESL 322e 322 Slot Ultrium Library (512.26 kb)