9 Powering on the PDU
NOTE:
Be careful identifying LEDs because the actual orientation of
the Interface Manager card may be different than what is shown
here.
12 Closing the library door
Verify that the power cables are firmly in place. Flip the two breaker
switches on at the power distribution unit.
10 Powering on the library
Verify that power cables are firmly in place.
Press the power button, located on the front of the library. The library
will take 20 minutes or more to boot, depending on the configuration.
Verify that the current state of the library appears in the System State
display on the front panel (“System On-line” or “System Off-line”).
Close the back door of the library.
NOTE:
Getting help
To change the cabinet state, press Ops on the Home screen of
the OCP to access the Operations screen.
• HP product information: http://www.hp.com/go/storage
• HP technical support and phone numbers:
nl
http://www.hp.com/support
• HP StorageWorks Library and Tape Tools (L&TT) diagnostic software:
http://www.hp.com/support/tapetools
CAUTION:
• HP StorageWorks Interface Manager and Command View for Tape
Allow the power on process to complete before beginning any
Libraries Software: http://www.hp.com/support/cvtl
library operations. Failure to do so can result in operation
problems.
• HP manuals: http://www.hp.com/support/manuals
11 Verifying the library status
Verify that the status LEDs of the Interface Manager card indicate a
normal state. For a description of LED diagnostic codes, refer to the
Troubleshooting chapter of the HP StorageWorks Interface Manager
and Command View TL user guide.
Page 4

---

...

Ce manuel est également adapté pour les modèles :
données dispositifs de traitement - HP ESL 712e Ultrium Tape Library (460.99 kb)
données dispositifs de traitement - HP StorageWorks ESL 286e 286 Slot SDLT Library (460.99 kb)
données dispositifs de traitement - HP StorageWorks ESL 286e SDLT Tape Library (460.99 kb)
données dispositifs de traitement - HP StorageWorks ESL 322e 322 Slot Ultrium Library (460.99 kb)