Log:
Évaluations - 2, GPA: 3 ( )

Instructions Proctor-Silex, Modèle 17610

Fabricant : Proctor-Silex
Taille : 282.93 kb
Nom Fichier : 802d1564-15b2-4744-a56d-b4acb321e837.pdf
Langue d'enseignement: enesfr
Aller à la télécharger



Facilité d'utilisation


5 840131800 ENv01.qxd 10/22/04 10:32 AM Page 6 Optional Features (on selected models) Adjustable Steam Switch This knob provides steam for fabrics such as wool and linen. See the “Fabric Setting Chart” for details. Set the switch to Dry Iron to iron without steam. Spray and Blast of Steam Buttons Push Blast Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen. Auto Shutoff Reset Button/Light This light comes on when the iron is first plugged in. After one hour, the iron will shut off and the light will go out. Push the Reset Button/ Light to turn the iron back on. Power On Light On units not provided with Auto Shutoff, this light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to OFF ( O). Retractable Cord 1. Pull cord to desired length. Do not unwind cord beyond colored tape indicator on cord. 2. To store cord, press and hold the Cord Release Button while guiding the cord into the storage area. CAUTION: Hold plug while retracting cord. Do not let cord retract freely. Cord may jam on reel or loose cord may whip back and forth and could cause injury. Vertical Steam 1. Follow Steps 1 through 6 in “To Steam Iron.” 2. Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror. 3. Hold iron about 6 inches away from garment and press and release Blast Button to steam out wrinkles. Do not press Blast Button more than once every 2 seconds. 4. To turn iron off, turn Temperature Control Dial to OFF ( O ). Unplug iron. 5. Empty water from the iron following directions in “Caring for Your Iron.” NOTE: Do not allow hot soleplate to touch delicate garments. 6 840131800 ENv01.qxd 10/22/04 10:32 AM Page 7 Troubleshooting PROBLEM Iron won’t heat. Water is leaking out of the iron. Iron won’t steam. Iron leaves spots on clothing. Wrinkles not removed. Fabric/clothing scorched. Twisted cord. Things TO CHECK • Is the iron plugged in and the outlet working? Check the outlet by plugging in a lamp. • Is the Temperature Control Dial turned to a fabric setting? • If auto shutoff model, is the Reset Light illuminated? If not, push to reset. • Do not overfill the water tank. • If steam ironing, is Adjustable Steam Switch in a steam position and the Temperature Control Dial in the steam range? Did the iron have enough time to preheat? • If dry ironing, make sure the Adjustable Steam Switch is in the DRY IRON position. • Check the water level. • Is the Adjustable Steam Switch in the STEAM position? • Has the iron had enough time to preheat? • ALWAYS empty the water tank of the iron after using. Water left in the tank may discolor clothing and soleplate. • Check Temperature Control Dial is set to correct fabric. • Check Temperature Control Dial and set to lower setting. Allow iron to cool down 5 minutes before continuing. • If the iron cord should become twisted, turn iron OFF (O), turn Control Dial to OFF (O) and unplug iron. Let cool. Empty water from iron.Hold iron cord in the middle of entire length. Let plug and iron dangle freely until cord uncoils. This will extend the life of your iron cord. 840131800 ENv01.qxd 10/22/04 10:32 AM Page 8 Customer Service If you have a question about your appliance, call our toll-free customer service number. Before calling, please note the model, type, and series numbers and fill in that information below. These numbers can be found on the bottom of your appliance. This information will help us answer your question much more quickly. MODEL:___________________ TYPE :___________________ SERIES: __________________ This warranty applies to products purchased in the U.S. or Canada. LIMITED WARRANTY This product is warranted to be free from defects in material and workmanship for a period of one (1) year for Hamilton Beach products or one hundred eighty (180) days for Proctor- Silex and Traditions products from the date of original purchase, except as noted below. During this period, we will repair or replace this product, at our option, at no cost. THE FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY LIABILITY IS EXPRESSLY LIMITED TO AN AMOUNT EQUAL TO THE PURCHASE PRICE PAID, AND ALL CLAIMS FOR SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED. There is no warranty with respect to the following items that are subject to wear, which may be supplied with this product: glass parts, glass containers, cutter/strainers, blades, drip valve seals, gaskets, clutches, and/or agitators. This warranty extends only to the original consumer purchaser and does not cover a defect resulting from abuse, misuse, neglect, use for commercial purposes, or any use not in conformity with the printed directions. This warranty gives you sp...

Ce manuel est également adapté pour les modèles :
Fers - 17600 (282.93 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories