Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
The roller surface must be correctly utilised (see fig. 3) in order to keep the surface even over the whole circumference of the roller and to obtain optimum temperature distribution. In this way scorching of the ironed product and a drop in hourly machine production are both avoided. SAFETY DEVICES FINGER GUARD -The finger guard (A) prevents the operator's hands being exposed to the heated ironing plate. By exerting minimum pressure on the bar, the ironing plate is raised from the roller. To begin ironing again, press the switch START and press the pedal. EMERGENCY STOP BUTTON -The ironing plate can be raised from the roller by pressing the red "mushroom shaped knob" (P). To disconnect the knob, turn in the direction of the arrows. To begin ironing again, press the switch START and press the pedal. MAIN SWITCH (B) -Prevents contact with live electric circuits. LOW VOLTAGE CONTROLS -All the controls on all models are connected to low voltage, 24 Volts. MANUAL IRONING PLATE CONTROL -In the event of power failures the ironing plate can be raised from the roller by turning the handwheel (see fig. 3) on the ironing plate motor anti-clockwise. This will avoid scorching the item or the roller covering. MAXIMUM TEMPERATURE SAFETY THERMOSTAT -This provides a double check on temperature, limiting an excessive rise in the latter should the main thermostat fail. FIREPROOF ROLLER COVERING -All models are provided with roller covering in fireproof material. INSULATION OF INDUCTION HEATED PARTS -The cover rear serves to insulate the external ambient from the high temperatures reached by the ironing plate and is lined with a layer of high quality insulating material. PEDAL -The foot pedal control (C) also has a rapid stop function: upon pressing it during working, it moves the heating part away from the roller. Before starting working, control the functioning of main safety devices: finger guard, emergency stop button and pedal. In case one of these devices should not work properly do not start ironing and call immediately a qualified technician. MAINTENANCE Any work on mechanical parts and the electrical system must be carried out by fully qualified personnel. Under normal working conditions, IPSO ironers require a minimum of maintenance. To ensure less friction on the items during the ironing process and to keep the chromed surface of the ironing plate clean, it is advisable the user uses daily "G-SIL", a special product for roller ironing which replaces wax. Spray evenly onto the roller as it rotates. Useful tip spray from under the feed-in wooden table with the ironing plate under pressure and slightly heated (80-90°C). Use the spray as and when necessary. Operations carried out by professionally qualified personnel: make sure that the ironed is disconnected from the mains before carrying out maintenance. The mechanical moving parts require weekly lubrication. The reduction gears are self-lubricating and do not require maintenance. The surface of the roller must be checked weekly to ensure that it is smooth and even along its whole length. Any worn areas can be re-padded with steel wool or the external covering can be replaced. ORIGINAL SPARE PARTS The original spare parts are specially made to fulfil our requirements regarding their manufacture, correspondence to the original compone...
Ce manuel est également adapté pour les modèles :Fers - RI1000/25 (669.04 kb)
Fers - RI1400/25 (669.04 kb)