Log:
Téléchargements : 6   Taille : 97 kb   Fabricant : AEG  
Catégorie : Hobs
@name

If you need assistance, contact our Customer Care Department on 01635 572700 Installation . This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. . Remove all packaging before using the hob. . Ensure that the electrical supply complies with the type stated on the rating plate. . Do not attempt to modify the hob in any way. Child Safety . This hob is designed to be operated by adults. Do not allow children to play ne

Téléchargements : 0   Taille : 111 kb   Fabricant : AEG  
Catégorie : Hobs
@name

The manufacturer refuses all responsibility for possible damages to things or people, resulting from incorrect installation or from an incorrect, improper or unreasonable use of the appliance. 3 B -Cooking Instructions B -Cooking Instructions Automatic start-up without valves Turn the corresponding knob anti-clockwise up to the maximum position (large flame, Fig. 1) and press start-up button P(fig. 1). Automatic start-up with valves Turn the corresponding knob anticlockwise up to the maximum pos

Téléchargements : 0   Taille : 111 kb   Fabricant : AEG  
Catégorie : Hobs
@name

WARNING: – Do not use abrasive or corrosive products. – Do not leave substances, such as lemon or tomato juice, salt water, vinegar, coffee and milk on the enameled surfaces for a long time. Stainless Steel The stainless steel parts should also be cleaned with soapy water and then dried with a soft cloth. WARNING: – Stainless steel can be stained if it remains in contact with highly calcareous water or aggressive detergents for an extended period of time. – Stainless Steel can also discolour if

Téléchargements : 0   Taille : 111 kb   Fabricant : AEG  
Catégorie : Hobs
@name

The voltage of the electric system must correspond to the value indicated in the label under the appliance. Make sure that the electric system is provided with an effective ground connection in compliance with the regulations and provisions of the law. Grounding is compulsory. 6 D -Installation & Warnings D -Installation & Warnings GAS TRANSFORMATIONS AND ADJUSTMENTS Replacing the nozzles If the equipment is adjusted for a type of gas that is different from the original, it is necessary to repla

Téléchargements : 0   Taille : 111 kb   Fabricant : AEG  
Catégorie : Hobs
@name

Depth: 500 mm. Height: 88 mm. Weight: 8 Kg. CUT OUT DIMENSIONS Width: 830 mm. Depth: 470 mm. Thickness: 30 mm. SUPPLY CONNECTIONS Gas: RC 1/2 inch (1/2 inch male) Rear right hand corner Electric: 230-240V 50Hz supply, 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse. IGNITION HT SPARK Spark Generator Ispra Control's BF 50066 - 230-240V 0.6 YA T120 Spark Gap : Fixed HEAT INPUT Rear Left Burner (semi rapid) 2.0 kW (6824 BTU/HR) Front Left Burner (rapid) 3.0 kW Natu

Téléchargements : 0   Taille : 130 kb   Fabricant : AEG  
Catégorie : Hobs
@name

17 Building In ................................................................................................... 17 Building over a cupboard or drawer ...................................................................... 17 Building over a kitchen unit with door ................................................................ 18 Fitting the hob to the worktop ............................................................................... 19 Electrical connections..............................

Téléchargements : 1   Taille : 130 kb   Fabricant : AEG  
Catégorie : Hobs
@name

Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown. WHEN THE HOB IS FIRST INSTALLED Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory. Operation HOB BURNERS To light a burner, turn the relevant control knob anticlockwise to the maximum position, then push it down to ignite the burner. Upon, ignition, adjust the flame as required. If the burner does not ignite, tur

Téléchargements : 1   Taille : 130 kb   Fabricant : AEG  
Catégorie : Hobs
@name

If you need assistance, contact our Customer Care Department on 01635 572700 Installation . This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. . Any gas installation must be carried out by a registered CORGI installer. . Remove all packaging before using the hob. . Ensure that the gas and electrical supply complies with the type stated on the rating plate, located near the gas supply pipe. . Do not attempt to mod

Téléchargements : 0   Taille : 161 kb   Fabricant : AEG  
Catégorie : Hobs
@name

Please pass the user instructions on to any future owner of the appliance. The following symbols are used in the text: 1 Safety instructions Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance. 3 Useful tips and hints 2 Environmental information Contents Operating Instructions. . . . . ...... . . . . . . . . ...... . . . . . . . ..... 4 Safety instructions...... . . . . . . . . ...... . . . . . . . . ...... . . . . . . . ..... 4 Descr

Téléchargements : 9   Taille : 177 kb   Fabricant : AEG  
Catégorie : Hobs
@name

If you need assistance, contact our Customer Care Department on 08705 350350 Installation . This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. . Any gas installation must be carried out by a registered CORGI installer. . Remove all packaging before using the hob. . Ensure that the gas and electrical supply complies with the type stated on the rating plate, located near the gas supply pipe. . Do not attempt to mod





catégories