Évaluations - 6, GPA: 3.7
(
)
)
|
Facilité d'utilisation
The container is provided with a scale which indicates the amount of water filled. 8 Setting the water temperature Set the appliance to the desired water temperature by turning the temperature selection dial: The white range of the selection dial: Warm to hot water from approx. 35 °C to approx. 85 °C The red range of the selection dial: Boiling water (Continuous on model Thermofix E, thermostatically controlled on models Thermofix EL and GL - once the required temperature has been, the fitted buzzer will operated). Please note: The temperature selection dial cannot be overwound! Switching the appliance ON Press the pushbutton which is located in the centre of the selection dial. The indicating lamp will now light up and the appliance will start to heat the water. Switching the appliance OFF If the appliance has been set to a temperature within the white range of the selection dial, it will switch itself off automatically once the set temperature has been reached. The appliance can be switched off at any time simply by turning the temperature selection dial anticlockwise. Caution: If the appliance has been set to continuous boiling (Thermofix E), it is necessary to switch it off manually. With the thermostatically controlled boiling facility (Thermofix EL, GL), the appliance will switch itself off automatically when the boiling point has been reached and will switch itself on again after the temperature has droped. Here, too, the appliance must be switched off manually. To obtain warm or hot water Turn the handle of the middle tap (marked red). To obtain cold water Turn the handle of the right-hand tap (marked blue) Cold water can be obtained at any time, even whilst a filling of water is heating up. Cold and hot water can be mixed by opening the red and blue taps simultaneously. Important Note: Installation and initial operation Installation and initial operation of the water heater must be carried out by a suitably qualified person who is responsible for ensuring that the work is done correctly and who can explain to the user how the appliance must be operated. The appliance must not be switched on when empty! 9 The overflow pipe must not be closed or blocked, nor may it be extended by means of flexible tubing or piping. Caution: The water container, mixer valve, swivel spout and overflow pipe will inevitably become hot (up to 100 °C) during use. Please therefore ensure that small children are kept well out of reach of the appliance. An additional safety device to prevent overheating is installed in this appliance, which cuts out if there is a functional defect or the appliance is used improperly. If the defect is still not rectified, the appliance absolutely must be inspected by an electrician. 1.3 Care of your appliance Wipe the appliance from time to time with a damp cloth and then rub dry. The chromiumplated parts may also be cleaned with a suitable cleanser. 1.4 Maintenance of appliance Decalcifying Important: Regular decalcifying ensures troublefree operation. Use only liquid decalcifying agents, e.g. Cillit decalcifier. Fill the appliance with 1 litre of water and heat to approx. 50 °C (beginning of the second white line on the temperature selection dial). Remove the cap (13) and stopper from the top of the container and pour in 50 - 100 ml of decalcifying agent depending on the amount of furring. Replace the stopper and cap and allow the decalcifying agent to take effect for approx. 30 minutes. Then fill the container to the 5 litre mark and reheat to 50 °C. Leave the appliance for a further 30...
Ce manuel est également adapté pour les modèles :Chauffe-eau - GL (436.19 kb)
Chauffe-eau - EL (436.19 kb)