Évaluations - 1, GPA: 4 ( )

Fabricant : Electrolux Taille : 387.67 kb Nom Fichier : Langue d'enseignement:

The knob (T) is used to set a HOLD temperature between 122°F and 210°F (50 and 99°C). HOLD temperature set: A three digit display (AT) indicates: H for Hold, 22 - 85 the temperature between 122 and 185°F 03 -10 the temperature between 203 and 210°F ( Owing to the internal conversion in °C not every value is possible. The following settings are allowed: Display Hold-Temperature °F H22 122 H31 131 H40 140 H49 149 H58 158 H67 167 H76 176 H85 185 H94 194 H03 203 H10 210 The programmed cooking process then operates as follows: the food is first heated to simmering temperature (approx. 212°F). When simmering temperature is reached, the energy supply is switched off. The food cools down and is then kept at the HOLD temperature that has previously been set. TT LT DT LD ZT LZ LR Q R LS AT T AD D AZ Z LU LC C U S Button, activation of settings Lamp, cooking temperature Button, cooking time Lamp, cooking time expires Button, starting time Lamp, starting time Lamp, soft settings Button, acoustic signal Button, soft Lamp, temperature pre-setting Display, cooking temperature Temperature selection knob Display, remaining cooking time Cooking time knob Display, time Starting time knob Control switch Power % 6 12 25 37 50 62 75 87 100 62.9693.01 Page 6 OPERATING INSTRUCTIONS E2 Electrolux 4.5 Shutting down LT DT LD ZT LZ LR Q R LS AT T AD D AZ Z LU LC C U S Button, activation of settings Lamp, cooking temperature Button, cooking time Lamp, cooking time expires Button, starting time Lamp, starting time Lamp, soft settings Button, acoustic signal Button, soft Lamp, temperature pre-setting Display, cooking temperature Temperature selection knob Display, remaining cooking time Cooking time knob Display, time Starting time knob Control switch Fig. 4 Right console An acoustic signal sounds when cooking is over. This is acknowledged by pressing the button (Q). The power supply is then switched off. All activated functions are subsequently switched off: • Press the pre-set temperature button (TT) for some seconds. Lamp (LT) goes out. • Press the cooking time button (DT). Lamp (LD) goes out. • Press the starting time button (ZT). Lamp (LZ) goes out. • Switch off the Soft button (R), if this was activated. • Switch off the control switch (S). • Turn from position I to 0. Lamp (LS) goes out. 0 = Off • Switch off the power isolator (H) (only available as an option). • Turn from position I to 0. 0 = Off After cooking has been completed, the control switch (S) is switched off. • Turn from position I to 0. The lamp (LS) goes out. 0 = Off Switch off the power isolator (H) (only available as an option). • Turn from position I to 0. 0 = Off The appliance can be switched off before cooking has been completed. If the function buttons (TT), (DT) and (ZT) are switched on and switching off is only done by means of the control switch (S), all the functions and previously set data for temperature, cooking time and starting time remain saved and active when the switch (S) is turned on again. If the appliance develops a fault, the electrical switch in the building must also be switched off and the main gas valve must be closed...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :