Log:
Évaluations - , GPA: ( )

Instructions HP, Modèle HP Fibre Channel Host Bus Adapters

Fabricant : HP
Taille : 31.63 kb
Nom Fichier :

Langue d'enseignement: en

Le document est chargé, s'il vous plaît patienter
Téléchargez votre Fermer
Le document est chargé, s'il vous plaît patienter
Téléchargez votre Fermer


Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


FibrChanl-00 HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes
Installing the FibrChanl-00 HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver
Installing the FibrChanl-00 HP PCI Tachyon TL/TS/XL2 Fibre
Channel Driver
To install the FibrChanl-00 HP PCI Tachyon TL/TS/XL2 Fibre Channel driver on an HP-UX 11i v3 system,
complete the following steps:
Step 1. Log in to the HP-UX 11i v3 system as superuser.
Step 2. Download the HP-UX 11i v3 depot in the /tmp directory on your system.
Step 3. Verify whether the HP-UX 11i v3 depot is downloaded successfully.
To verify whether the HP-UX 11i v3 depot is downloaded successfully, enter the following command
at the HP-UX prompt:
# swlist -d @ /tmp/<11.31_depot>
The following information is displayed:
FibrChanl-00 B.11.31 FibreChannel; HW=A6795A, A5158A
Step 4. To install the HP Tachyon TL/TS/XL2 Fibre Channel driver on the HP-UX 11i v3 system, enter the
following command at the HP-UX prompt:
# swinstall -x autoreboot=true -s /tmp/<11.31_depot> FibrChanl-00
The following message is displayed:
Execution Phase Succeeded
Removing the FibrChanl-00 HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver
To remove the FibrChanl-00 HP PCI Tachyon TL/TS/XL2 Fibre Channel driver from an HP-UX 11i v3 system,
enter the following command at the HP-UX prompt:
# swremove -x autoreboot=true FibrChanl-00
The following message is displayed:
Execution Phase succeeded
Reinstalling the FibrChanl-00 HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver
To reinstall the HP Tachyon TL/TS/XL2 Fibre Channel driver on an HP-UX 11i v3 system, enter the following
command at the HP-UX prompt:
# swinstall -x autoreboot=true -x reinstall=true -x reinstall_files=true -s\
/tmp/<11.31_depot> FibrChanl-00
The following message is displayed:
Execution Phase Succeeded
8
Chapter 1

...

Ce manuel est également adapté pour les modèles :
Matériel de réseau - HP-UX 11i v3 I/O Cards (31.63 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories