Log:
Évaluations - , GPA: ( )

Instructions HP, Modèle HP Fibre Channel Host Bus Adapters

Fabricant : HP
Taille : 546.91 kb
Nom Fichier :

Langue d'enseignement: enda

Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter


Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


This document provides information about the B.11.31.1109.01 release of the FibrChanl-03 (fcoc)
Fibre Channel Mass Storage Driver for HP-UX 11i v3.
FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3
overview
This release of the document for the FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 (version B.11.31.1109.01) documents defect fixes and version changes.
New and changed features in this release
New features
This feature is new with the B.11.31.1109.01 version of the FibrChanl-03 (fcoc) Fibre Channel
Mass Storage Driver for HP-UX 11i v3:

There are no new features with this release.
Known problems fixed in this version
These issues have been fixed in the FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 September 2011 (AR1109) release.
Table 1 HP-UX September 2011 (AR1109) Fixes
Defect ID
Description
QXCR1001122377
This fixes the issue where the fcoc driver may panic with “Bad News!” when a fcmsutil command
is being executed while DLKM unload operation is in progress.
QXCR1001129474
This fixes the issue where the fcoc driver may panic with “Bad News!” when concurrent fcmsutil
stat commands are being run.
QXCR1001081641
This fixes the issue where, after performing a port disable/enable sequence with fcmsutil, the
fcmsutil get remote all command would not display the correct data.
QXCR1001083098 The System Management Homepage will now display the correct SLI version in the HBA Adapter
Firmware Version field.
QXCR1001115601
The maximum IO size supported by the controller has been set at 1MB.
QXCR1001075202 This fixes the issue where ioscan may not show the fcoc driver’s device special files (DSFs) when
a reboot is followed after FibrChanl-03 depot installation.
QXCR1001088875 This corrects a problem wherein a change to the allocated link bandwidth in the server profile
in the Virtual Connect Manager (VCM) failed to be displayed correctly in fcmsutil output without
either rebooting, resetting, or disabling then enabling the FC HBA. In addition to the changes
made in the FCOC driver, this fix is dependent upon specific firmware versions in the FC HBA.
For the FlexFabric Adapter NC551m (580151-B21), the minimum firmware version required to
access this fix is 2.704.322.0.
Table 2 HP-UX March 2011 (WEB1103) Fixes
Defect ID
Description
QXCR1001070913
This release fixes a problem in which when a port is disabled, SNIA does not display any port
or adapter attributes for other enabled ports.
Table 3 HP-UX March 2011 (AR1103) Fixes
Defect ID
Description
N/A
This is the first general release.
FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3 overview
3


...

Ce manuel est également adapté pour les modèles :
Matériel de réseau - HP-UX 11i v3 I/O Cards (546.91 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories