Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Table 4 HP-UX 11i v3 March 2011 fixes — IEther-00 B.11.31.1103
SR number
Description
QXCR1001043759
When heavy traffic is run on a NIC with the Intel 82546 chipset with TSO enabled, an MCA
occurs. The problem is due to known errata with NICs with this chipset. This problem occurs
with IEther-00 version B.11.31.0909. Affected products are AB352A, AB290A, AB545A,
A7011A, A7012A.
QXCR1001086659
When traffic is run on a NIC with the Intel 82575 chipset with TSO enabled, a system panic
occurs with "iether_post_tdesc_tso" function on top of the stack trace. This problem occurs
with IEther-00 version B.11.31.1003. Affected products are AD221A, AD222A, AD393A.
QXCR1001062966
Typo error in the nwmgr --st subsys -c
QXCR1001063280
The command nwmgr -s -A all --sa --fr current -c lan
interface controlled by the iether driver fails with the following error message: New
512byte transmit buffer size limit = ERROR: Unsupported attribute.
QXCR1001062969
Typo error in the nwmgr_iether(1M) man page.
QXCR1001075909
When a guest vNIC is created over the iether interface, the iether driver holds lock too
long during AVIO packet processing. This causes an HPVM host panic.
QXCR1001075915
When a guest vNIC is created over the iether interface, the iether driver receives packets
from AVIO guest and handles reset request from the AVIO guest simultaneously. Due to a
problem in the locking mechanism, interface pointers can be reset to null, which causes an
HPVM host panic.
QXCR1001082383
When a guest vNIC is created over the iether interface, HPVM guests with AVIO networking
receive duplicate multicast and broadcast packets from host.
4 Known problems and limitations
No known problems were identified for this version of IEther-00 at the time of this publication.
5 Compatibility and installation requirements
This section describes the compatibility information and installation requirements for this release.
•
For specific installation instructions, see the installation procedure or overview document for
your card.
•
For detailed information on supported server platforms, operating systems, and firmware level
requirements, see the Ethernet Support Matrix.
These documents are available at:
http://www.hp.com/go/gigabit-ethernet-100bt-cards-docs
5.1 Operating system and version compatibility
This release is specific for HP-UX 11i v3 (B.11.31).
5.2 Hardware requirements
This version of IEther-00 runs on HP Integrity and HP 9000 servers with the HP-UX 11i v3 (B.11.31)
operating system.
6 Related information
The latest documentation for Ethernet cards is available in English at:
http://www.hp.com/go/gigabit-ethernet-100bt-cards-docs
4
...
Matériel de réseau - HP-UX 11i v3 I/O Cards (112.96 kb)