Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Problems fixed in recent versions
Table 2 HP-UX 11i v2 September 2010 Fixes — IEther-00 B.11.23.1009
SR Number
Description
QXCR1001049943
NULL pointer de-reference in iether driver function “iether_send_complete” causes a “Data
Key Miss Fault,” which causes a system crash.
4 Known problems and limitations
•
Installing IEther-00 B.11.23.1107 with TSO enabled causes a system panic.
If you install IEther-00 version B.11.23.1107 on a server with TSO enabled for certain cards,
the system panics. This problem occurs with the following cards: AD337A, AD338A, AD339A,
447883-B21, 445978-B21.
This problem will be corrected in a future release of the IEther-00 bundle.
Workarounds:
◦
If you have TSO enabled and you do not need any of the fixes described in Table 1
(page 3), then do not install this version of IEther-00.
◦
If you need one or more of the fixes described in Table 1 (page 3), then disable TSO
before installing this version of IEther-00.
To disable TSO on each specific interface, use the lanadmin command to set the “vmtu”
tunable to 0 for each PPA (Physical Point of Attachment) number. For example:
# lanadmin -X vmtu 0
For more information on the lanadmin command, see the Ethernet Support Guide for
HP-UX 11i v2 and 11i v2. This document is available at:
http://www.hp.com/go/gigabit-ethernet-100bt-cards-docs
•
No lanboot support for NC360m.
Lanboot of HP-UX 11i v2 is not supported on the NC360m 2-port gigabit mezzanine card.
Workaround: None at the time of this publication.
5 Compatibility and installation requirements
This section describes the compatibility information and installation requirements for this release.
•
For specific installation instructions, see the installation procedure or overview document for
your card.
•
For detailed information on supported server platforms, operating systems, and firmware level
requirements, see the Ethernet Support Matrix.
These documents are available at:
http://www.hp.com/go/gigabit-ethernet-100bt-cards-docs
•
Support Matrix documents are listed alphabetically in the “General reference” section.
•
Installation guides are listed alphabetically in the “Setup and install — general” section.
5.1 Operating system and version compatibility
This release is specific for HP-UX 11i v2 (B.11.23).
5.2 Hardware requirements
This version of IEther-00 runs on HP Integrity and HP 9000 servers with the HP-UX 11i v2 (B.11.23)
operating system.
4
... Ce manuel est également adapté pour les modèles :
Matériel de réseau - HP-UX 11i v2 I/O Cards (157.99 kb)