Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Workaround
Fol ow the correct iqn name syntax as described in section 3.2.6 of RFC 3720.
For Windows—In the initiator GUI, click Reset under Change in the General tab to reset the iqn name to
its original name that was created when you installed the initiator.
For Linux—Edit the InitiatorName set ing in the initiatorname.iscsi file using the correct syntax.
For Linux and Windows—Reinstalling the initiator creates a valid iqn name.
iSCSI initiator LUNs disappear after changing the initiator iqn name
The mpx100 maintains a database of targets, initiators and LUNs and the corresponding links between
them. Whenever Command View presents or removes a LUN from an iSCSI initiator, it updates the
mpx100’s database. When a new iqn name logs into the mpx100, it is considered a new initiator and
no LUNs are assigned to it. Al LUN assignments to the old iqn are still maintained.
Workaround
Using Command View EVA, unpresent the LUN from the old initiator iqn and then present it to the
new initiator iqn name. Remove the old initiator from the mpx100 database with either the mpx100
Manager GUI or the CLI.
Windows iSCSI initiators must add Tcp1323Opts to registry
Timestamps help TCP measure round trip time (RTT) accurately to adjust retransmission timeouts. The
Timestamps option provides two timestamp fields of 4 bytes each in the TCP header: one to record the
time the initial transmission is sent, and one to record the time on the remote host.
To enable timestamps, the Tcp1323Opts entry must be set to REG_DWORD = 2 under
HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters.
Installing the Windows iSCSI initiator from the HP StorageWorks iSCSI Connectivity Option for Enterprise
Virtual Array Windows software kit automatically adds this registry set ing.
Workaround
Make the change to the registry, or cut and paste the following lines to a text file named
tcp1323opts.reg.
tcp1323opts.reg.
:
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\Current-
ControlSet\Services\Tcpip\Parameters]
"Tcp1323Opts"=dword:00000002
Double-click the file to add changes to the registry for the iSCSI initiator.
CAUTION:
Using the Registry Editor incorrectly can cause serious problems that can require reinstallation of the
operating system. Back up the registry before making any changes. Use the Registry Editor at your
own risk.
EVA iSCSI Connectivity Option 5.0
9
... Ce manuel est également adapté pour les modèles :
données dispositifs de traitement - HP EVA4000 Starter Kit (115.97 kb)
données dispositifs de traitement - HP EVA4000/6000/8000 Disk Arrays (115.97 kb)
données dispositifs de traitement - HP StorageWorks EVA3000 EMEA Bundles (115.97 kb)
données dispositifs de traitement - HP StorageWorks EVA4000 SAN Starter Kit (115.97 kb)