Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
HP StorageWorks
Warranty Information
If the product in which this part is being replaced is stil under
Power Supply/Blower
HP warranty, then the replacement part(s) referred to in these
Replacement Instructions is provided under the terms and conditions
Replacement Instructions
of the Hewlett-Packard Company Limited Warranty for that
product. A copy of this Limited Warranty may be viewed at:
ht p://h18006.www1.hp.com/products/storageworks/warranty.html
If this is a trade sale part (product out of warranty), then the replacement
part(s) referred to in these Replacement Instructions is provided under
HP's express limited warranty statement, which may be viewed at:
ht p://customerops.corp.hp.com/1sw/pdm_om/warranty_support/
policies/2330100.doc
The replacement part takes on either the Limited Warranty Period of the
part being replaced or a ninety-day period that begins upon installation
of the replacement part, whichever is greater.
The only warranty for this replacement product is as noted above.
Nothing in these replacement instructions should be construed as
constituting an additional warranty. The information provided in these
replacement instructions is provided "AS IS" and HP is not liable for
These instructions apply to the MSA30, MSA 1000,
technical or editorial errors or omissions contained herein.
EVA 3000/5000, and EVA 4000/6000/8000
product families. The part may also be used in other
HP products. Please refer to documentation for your
About This Document
specific product for detailed replacement instructions.
This document describes the procedure for replacing the power
supply/blower assembly used in MSA30, MSA 1000, EVA
3000/5000, and EVA 4000/6000/8000 products.
Printed on at least 50% total recycled fiber with at least
NOTE:
10% post-consumer paper.
Because this component is used in several products, the
drawings may reflect a different enclosure than the one you
have. The removal and replacement procedure is the same
for each product.
© Copyright 2005-2006 Hewlet -Packard Development Company,
L.P.
Second edition January, 2006
Product names mentioned herein may be trademarks of their
respective companies as reflected by an associated footnote.
Before you begin
The information in this document is subject to change without
Observe the following precautions when replacing the power
notice.
supply/blower.
Printed in Puerto Rico.
www.hp.com
CAUTION:
You have only seven minutes to perform the replacement
procedure! Both power supplies must be installed for the
enclosure to cool properly. If a power supply fails, leave it in
place in the enclosure until a new power supply is available
to install. The enclosure could shut down due to overheating
unless the power supply is replaced within seven minutes of
removal of the failed/failing power supply.
If cabling is obstructing access to the power supply/blower,
carefully move the cables out of the way to avoid loosening
any connections.
Parts can be damaged by electrostatic discharge. Use proper
anti-static protection. Refer to the documentation that shipped
with your system for additional information.
.
Have a copy of the product User Guide available for reference.
*5697-5527*
You can download a copy of the User Guide from the product
support page on the HP web site.
Page 1
... Ce manuel est également adapté pour les modèles :
données dispositifs de traitement - HP EVA4000 Starter Kit (832.61 kb)
données dispositifs de traitement - HP EVA4000/6000/8000 Disk Arrays (832.61 kb)
données dispositifs de traitement - HP StorageWorks EVA3000 EMEA Bundles (832.61 kb)
données dispositifs de traitement - HP StorageWorks EVA4000 SAN Starter Kit (832.61 kb)