of strokes 10 000 - 19 400 spm Abrasive stroke 2.5 mm (0.1 in.) Weight 1.5 kg (3.3 lbs.) Safety UL 745, CSA C22.2 No. 745 Symbols V Volts A Amperes Hz Hertz W Watt ~ Alternating current n0 No load speed Class II Construction rpm Revolutions per minute spm strokes per minute O Diameter Intended use The Deltex sander can be used to smooth wood, plastics, metal, steel, composite materials, paint- lacquers, filler, stopper and similar materials. Thanks to the triangular shape of the sanding pad the

The sanding performance and quality dependmainly on the choice of the right sandingmaterial. Festool offers the appropriate sandingmaterial for all applications (see Festoolcatalogue). We recommend the following settings on therotary control (2.1) for electronic machines. 5 - 6 -sanding with max. drive-sanding old paint-sanding wood and veneer prior to painting-interim sanding of paint on surface. 4 - 5 -sanding of thinly applied primer-sanding of wood with sanding vlies-sanding edges on wooden

There is an increased riskof electric shock if your body is grounded. . Don.t expose power tools to rain or wetconditions. Water entering a power tool willincrease the risk of electric shock. . Do not abuse the cord. Never use thecord to carry the tools or pull the plug froman outlet. Keep cord away from heat, oil,sharp edges or moving parts. Replace damaged cords immediately.increase the risk of electric shock. Damaged cord. . When operating a power tool outside,use an outdoor extension cord ma

Some examples of these chemicals are: • Lead from lead-based paints, • Crystalline silica from bricks and cement and other masonry products, • Arsenic and chromium from chemically-treated lumber. The risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals work in a well ventilated area and use approved safety equipment, such as dust masks that are USER MUST READ AND UNDERSTAND IN-specially designed to filter out micro- STRUCTI

Instruction manualEccentric sande. Page 2 - 6 IMPORTANT: Read and understand all instructionsbefore using. Guide d.utilisationPonceuse excentriqu. Page 7 - 11 IMPORTANT: Lire et comprendre toutes lesinstructions avant de demarrer les travaux. Manual de instruccionesLijador excentric. Pagina 12 - 16 IMPORTANTE: Lea y comprende todas lasinstrucciones antes de usar. 457 984_00 . GENERAL SAFETY RULESWARNING! Read and understand allinstructions. Failure to follow all instructionslisted below, may res

Be sureswitch is off before plugging in. Carryingtools with your finger on the switch or pluggingin tools that have the switch on invites accidents. 12Remove adjusting keys or switchesbefore turning the tool on. A wrench or keythat is left attached to a rotating part of the toolmay result in personal injury. 13Do not overreach. Stand on both feet ankeep proper footing and balance at alltimes. Proper footing and balance enables bettercontrol of the tool in unexpected situations. 14Use safety equi

Manual de instrucciones Pagina 12 - 16 IMPORTANTE: Lea y comprende todas las instrucciones antes de usar. 469 537_001 1 General safety rules Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fi re and/ or serious personal injury. SAVE THESE INSTRUCTIONS 1) Work area safety a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence

of strokes 30 000 spm / 12 000 - 30 000 spm Sanding stroke 2.0 mm (0.079 in.) Sanding base (delta form) O 125 mm (4.9 in.) Weight 1.1 kg (2.4 lbs.) Safety llevel / II Symbols V volts A amperes Hz hertz W watt ~ alternating current n0 no load speed Class II Construction rpm revolutions per minute spm strokes per minute Intended use reasons. The machines may only be used for dry sanding. The user bears sole responsibility for any damage or accidents resulting from incorrect use. Electrical connect

The turbo-filter has to be changed when it is so full of dust that the extraction power diminishes: –Push the front cardboard section of the turbo- filter with the sealing lip (3.1) onto the extraction nozzle (3.8) of the fi lter holder –Insert rear cardboard section with slot (3.3) onto the retaining strip (3.9) of the fi lter holder – Push the filter holder with its opening (3.6) as far as it will go onto the extraction nozzle (3.5) of the machine and clamp tight by turning rotary knob (3.7).

464 760_004 Manual de instrucciones Lijadora excentrica Pagina 12 - 16 IMPORTANTE: Lea y comprende todas las instrucciones antes de usar. GENERAL SAFETY RULES WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work area 1 Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2 Do not operate power tools in explosive atmospher