4 5 6 WOOD SCRAP (NOT SUPPLIED) POLE SECTIONS SHOULD HAVE A 3-1/2" (9 CM) MINIMUM OVERLAP. NOTE: 5. P/N 21495407 08/05 10 6. Install rod (7) through holes in bottom pole section (6) and eyebolt (8). 7 4 8 6 5 7. Insert pole assembly into tank assembly as shown. 6 WARNING! 7 TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR 8 PROPERTY DAMAGE. IMPORTANT!: DO NOT OVER TIGHTEN 8. Carefully place unit on its side. Secure pole bottom (6) to ta

8. Attach backboard assembly to pole section (11). Install pole cap (43). 42 21 43 21 29 29 27 USE CAUTION; ELEVATOR ASSEMBLY IS HEAVY. TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. WARNING! 11 27 P/N 21154401 01/04 10 9. 9. 10. Attach adjustment rod (47) to lower elevator Insert handle assembly through pole tubes (29) using bolt (27) spacer (59) and nut mount assembly as shown. Lock pole (42) as shown. assembly in p

x 1.19 Long 56 4* 203257 Zip Tie 57 1 203255 Front Cover * You may have extra parts with this model. P/N 211447 04/01 4 printed on recycled paper ENGLISH INSTRUCTIONS use washers here on spring return style rim. NOTE B: Mounting nuts and IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF bolts supplied with rim hardware. THIS OWNERS MANUAL 20. 1. Remove all contents from underside of tank. Keep tank (1) bottom side 21. up. 22. 2. Insert axle rod (2) through wheel (3), as shown. Secure wheel a

PLEASE WRITE YOUR MODEL NUMBER IN THE SPACE PROVIDED ABOVE. Toll-Free Customer Service Number for U.S: 1-800-558-5234 Internet Address: © COPYRIGHT 2002 by HUFFY SPORTS 1 12/02 P/N 211670 McCall's REBOUNDER PARTS LIST (See Hardware Identifier) REBOUND ARM Item Qty. Part No. Description 1 1 200416 Base (Black) 2 4 200417 Casters 3 1 200419 Left Support Brace 4 1 201875 Right Support Brace 5 1 200423 Outer Pole Assembly 6 1 201876 Inner Pole, Fixed Upright 7 1 201877 T-Screw OUTER POLE GRADUATED S

• When moving system, use caution to keep mechanism from shifting. • Keep pole top covered with cap at all times. • Do not allow water in tank to freeze. During sub-freezing weather add non-toxic antifreeze, sand or empty tank completely and store. (Do not use salt.) • Use extreme caution if placing system on sloped surface. System may tip over more easily. 201241 2/99 In the U.S.:1-800-558-5234 and Canada: 1-800-284-8339 The NBA and individual NBA member team identifications reproduced on this

* IMPORTANT! Holes in top and bottom pole sections MUST align to correctly position elevator system. Continue to check alignment while assembling pole sections. *Row of 3 holes on top pole section must be parallel with adjustment knob. Once assembled, pole sections can NOT be separated! POLES MUST OVERLAP 3-1/2” (9 CM) MINIMUM. NOTE: Discard this carriage bolt immediately after completing this step. DO NOT discard flange nut and washer. 6 printed on recycled paper 4 P/N 211387 5/99 6. 6. Attach

Carefully rock them in a circular motion to ream out any excess paint from holes if necessary. AVANT DE COMMENCER ! Pour garantir l'utilisation optimale du panneau, les composants du systeme elevateur et la visserie doivent etre bien ajustes (serres). A titre d'essai, inserez les gros boulons dans les gros trous des tubes du systeme elevateur, des supports du panneau et des plaques triangulaires. Basculez-les avec precaution en imprimant un mouvement circulaire pour eliminer l'excedent de peintu

Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift weight system. IMPORTANT! Remove all contents from boxes. Be sure to check inside pole sections; hardware and additional parts are packed inside. 4 P/N 211689C 05/03 Get to know the basic parts of your basketball system..... FRONT BACK TOP POLE MIDDLE POLE FRONT COVER RIM BOTTOM POLE BASE STRUTS ELEVATOR ASSEMBLY BACKBOARD WHEEL CARRIAGE ASSEMBLY 5 05/03 P/N 211689C Item Qty Part No Descript

Item #42 (1) Item 47 (5)* Item #17 (14)Item #14 (2) Item #10 (3)* Item #34 (3) Item #53 (2) Item #13 (12)* 3 12/03 P/N 214946E HARDWARE IDENTIFIER (STEEL SPACERS & RODS) Item #39 (2) Item #7 (1) HARDWARE IDENTIFIER (PLASTIC SPACERS, CAPS & CLIPS) Item #36 (1) Item #44 (4) Item #55 (4) Item #57 (1) Item #31 (12) HARDWARE IDENTIFIER (OTHER) Item #48 (1) P/N 214946E 12/03 4 PARTS LIST - See Hardware Identifier Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Qty

5. Install rod (7) through holes in bottom pole section (3) and 25. Install handle assembly to lower elevator tubes (35) using eyebolt (8). bolt (36), spacers (37) and nut (38). NOTE: Before going onto the 6. Insert pole assembly into tank assembly as shown. Secure pole next step, set adjustment system to the 10’ (3.05m) setting. assembly with upper pivot bracket (9) and lock nut (10). 26. Insert bolt (36) through the left side upper elevator tube (40), then IMPORTANT! Two people recommended for