Log:
Trier : Nom ↑   Téléchargements   Évaluation   Taille ↑  

ACR Electronics ResQMate Y1-03-0240A

Téléchargements : 0 Taille : 903 kb    Fabricant : ACR Electronics  
Catégorie : navigateurs GPS et des récepteurs

The 121.5 MHz signal is used by SAR to home in on the beacon as they approach it. The 406 MHz signal is detected by multiple satellites and from that information the location of the beacon can be calculated. This data alone is sufficient for SAR to find persons or ships in distress in a reasonable timeframe. 2. Anatomy of your beacon NOTE: When unpacking your beacon, it is recommended that you save the original packaging for re-use when shipping the beacon for battery replacement in the future.

ACR Electronics ResQMate RLB-40

Téléchargements : 2 Taille : 903 kb    Fabricant : ACR Electronics  
Catégorie : navigateurs GPS et des récepteurs

A OWNER VESSEL RADIO CALL SIGN UIN # CAUTION: Before proceeding to install, test or use your new ACR Electronics’ product, please read this Product Support Manual in its entirety. If you have questions regarding the contents of the manual, please contact our Technical Service Department at ACR Electronics, Inc., Telephone +1 (954) 981- 3333. Please be ready to provide the technician with the page number you wish to discuss. If you have a question that is not covered in the manual, please visit o

ACR Electronics PATHFINDER 2714

Téléchargements : 13 Taille : 800 kb    Fabricant : ACR Electronics  
Catégorie : équipement pour bateaux

2714 FCC ID. B66ACR-SART-PF-3 Search and Rescue Transponder (SART) ACR Electronics, Inc. 5757 Ravenswood Road Fort Lauderdale, Fl 33312 +1(954) 981-3333 • Fax +1 (954) 983-5087 Email: Info@acrelectronics.com A Chelton Group Company Forward Congratulations and thank you for purchasing the ACR PathFinderTM3 Search and Rescue Transponder (SART). The combination of computer aided design; high quality raw materials and quality-controlled manufacturing produce a superior product. The Test Facility at

ACR Electronics SARLink 2882

Téléchargements : 19 Taille : 787 kb    Fabricant : ACR Electronics  
Catégorie : Equipement de sécurité

If someone attempts to register a PLB reported as stolen, NOAA or your national authority will notify the appropriate police department. APPENDIX A - ACCESSORIES 1. Multi-Function Belt Clip The SARLink™ comes standard with a multi- function belt clip. To install the clip, simply align the bottom tabs on the clip with the insert holes located on the bottom of the beacon. Snap the clip in place by pressing the top of the clip so that the two top tabs engage in the two insert holes on the top of th

ACR Electronics ARX-50

Téléchargements : 10 Taille : 424 kb    Fabricant : ACR Electronics  
Catégorie : Equipement de sécurité

If you have questions regarding the contents of the manual, please contact our Technical Service Department at ACR Electronics, Inc., Telephone +1 (954) 981-3333. Please be ready to provide the technician with the page number you wish to discuss. If you have a question that is not covered in the manual, please visit our website and access the Frequently Asked Questions (FAQs) section for further information or call our Technical Service Department. The website address is If in the future you los

ACR Electronics RCL-300A

Téléchargements : 9 Taille : 590 kb    Fabricant : ACR Electronics  
Catégorie : équipement pour bateaux

Refer to Table 2 for proper wire size for connection of the input power lines. NOTE: As per the wiring scheme, the ORANGE wire is connected to the positive terminal and the BLUE wire is connected to the negative terminal of the power source. CAUTION: HID light systems, when first turned on, have a high inrush current requirement of 25 amps. If you activate the light and the lamps flicker on and off repeatedly, check the voltage being supplied. This condition can be experienced with voltage input

ACR Electronics ResQFix PLB-300

Téléchargements : 0 Taille : 764 kb    Fabricant : ACR Electronics  
Catégorie : navigateurs GPS et des récepteurs

Figure 5 - Belt Clip . 5.1 Multi-Function Belt Clip The MicrOFix™ comes standard with a multi-function belt clip. To install the clip, simply align the bottom tabs on the clip with the insert holes located on the bottom of the beacon. Snap the clip in place by pressing the top of the clip so that the two top tabs engage in the two insert holes on the top of the beacon (see figure 5). To remove the clip, push up and back on the top tabs one at a time to disengage the clip from the beacon. The Mic

ACR Electronics Y1-03-0229C

Téléchargements : 12 Taille : 424 kb    Fabricant : ACR Electronics  
Catégorie : Equipement de sécurité

The demodulated 121.5 MHz audio signal is annunciated at all times. If there is not any signal on the 121.5 MHz carrier, whether activated beacon or other source, static will be audible. The speaker volume is high, and the signal strength meter is active. Monitor Low mode This mode is identical to the Monitor High mode except that the speaker volume is lower. NOTE: The ARX-50 reverts back to Alarm mode after 15 minutes in Monitor High mode. Training mode Operation in Training mode is identical t

ACR Electronics GlobalFix Y1-03-0233

Téléchargements : 0 Taille : 1 mb    Fabricant : ACR Electronics  
Catégorie : navigateurs GPS et des récepteurs

At the same time the 406 MHz signal is activated, a 121.5 MHz signal is turned on. The 121.5 MHz signal is used by SAR to home in on the beacon as they approach it. The 406 MHz signal is detected by multiple satellites and from that information the location of the beacon can be calculated. This data alone is sufficient for SAR to find persons or ships in distress in a reasonable timeframe. However, as a further enhancement, some beacons have a GPS engine onboard. This feature allows the beacon t

ACR Electronics AquaLink 2883

Téléchargements : 42 Taille : 787 kb    Fabricant : ACR Electronics  
Catégorie : Equipement de sécurité

Repeated activations could be viewed as a hoax. 11. Preventing false alerts A false alert is any activation of the beacon, intentional or otherwise, that does not result from a situation of grave and imminent danger. Be sure to do the following to help minimize false alerts: . Register your beacon. This does not reduce false alert rates; however, when the beacon is properly registered, the situation can usually be resolved with a phone call. . Be careful with whom you leave your beacon. Make sur





catégories