You will need to install it in your 8310 frame before you can connect cables. Use the following steps to install a rear module in an 8310 openGearTM frame: 1. Refer to the openGearTM 8310 frame Owner’s Manual, to ensure that the frame is properly installed according to instructions. 2. On the rear of the 8310, locate the card frame slot. 3. As shown in Figure 2, seat the bottom of the rear module in the seating slot at the base of the frame’s back plane. Figure 2. Rear Module Installation 4. Ali

website. ...............................................................................22 9341 User Manual • •••• (V 1.0) Page 5 of 22 Introduction In This Chapter This chapter includes the following sections: • A Word of Thanks • Overview • Functional Block Diagram • Features • Documentation Terms A Word of Thanks Congratulations on choosing the openGear. 9341 Analog Audio to AES Converter. The 9341 is part of a full line of modular conversion gear for broadcast TV environments. The Cobalt Dig

• Last Author: MWB • Printing Date: 7/7/2008 3:10 PM The information contained in this Owner’s Manual is subject to change without notice or obligation. Copyright © 2008 Cobalt Digital Inc. All rights reserved. Contents of this publication may not be reproduced in any form without the written permission of Cobalt Digital Inc. Reproduction or reverse engineering of copyrighted software is prohibited. Notice The material in this manual is furnished for informational use only. It is subject to chan

website. ...............................................................................28 9034-SD Owner’s Manual • •••• (V 2.0) Page 5 of 28 Introduction In This Chapter This chapter includes the following sections: • A Word of Thanks • Overview • Functional Block Diagram • Supported Audio and Video Formats • Documentation Terms A Word of Thanks Congratulations on choosing the openGearTM 9034-SD Analog to Digital Converter with Audio Embedding and Frame Sync. The 9034-SD is part of a full line

website. ...............................................................................24 9032 Owner’s Manual • •••• (V 2.0) Page 5 of 24 Introduction In This Chapter This chapter includes the following sections: • A Word of Thanks • Overview • Functional Block Diagram • Supported Audio and Video Formats • Documentation Terms A Word of Thanks Congratulations on choosing the openGearTM 9032-SD Analog to Digital Converter with Frame Sync. The 9032-SD is part of a full line of modular conversion g

The following pages list the parameters from the menu tabs available in the DashBoard software when connected to a 9034. Description Card Info (Read-only) Product CDI-9034 The product name Manufacturer Cobalt Digital Inc. The manufacturer of the product Software Release Number ### The release number of the firmware in this card Software Build Date ### The internal build number of this software Software Build Time ### The date and time the software was created +12 V Power Rail #.## W Positive Sup