CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............................................................................1 USING THE REMOTE CONTROL .....................................................................................3 BATTERIES FOR REMOTE CONTROL ............................................................................ 3 PACKING LIST .............................................................................................................................. 4 GENERAL INFORMATION..

Damage requiring service---If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid is spilled on the product or when objects have fallen into the product. c. When the product has been exposed to rain or water. d. When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described

The TV will switch to channel 1 if no number is input in 3 seconds. The second is for tens if it is “2”,“12 -”appears on. The TV will switch to channel 12 if no number is input in 3 seconds and the third is for ones., Press .OK.to turn to the desired channel quickly after the corresponding number is input. PAGE 17 Note: This function is only available in TV mode . Sleep Function Press.SLEEP.on the remote control once to activate the function and subsequent keying in to select the sleep time of 0

(2) In Manual mode, you can press digit keys on the remote control to edit each channel. In edit status, you may press .MENU. to exit or press .OK. to confirm your operation, and then the channel you edited will be set. Once you enter into the selected Channel item, the channel will be set You can press any button of.MENU.,.OK.to exit from the Favorite Menu. MTS switch You can press (.I/II) to select among Mono, Stereo and SAP, in each channel ,Stereo and SAP mode your selection will be stored.

The following section of this manual will focus on operation method of the remote control. (2)The figures shown in this manual may be somewhat different from the actual situation, please reference to the practicality. 2 INTRODUCTION (continued) Control Buttons (continued) remote control o- -POWER HD/TV MODE PICTURE MODE- DISPLAY PROGRAM UP MUTE MENU VOLUME DOWN DOUBLE VIEWING' RECALL- 0-9 NUMERIC PIP AV/TV-PIP CHANNEL UP- PIP CHANNEL DOWN-PIP STILL- _RECALL_. ¿7 TIMEI -O CZf a

Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak chemicals. . Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth. . The batteries supplied with the product may have a shorter life expectancy due to storage conditions. If the remote control is not used for an extended period of time, remove the batteries from the remote control. 2jk424hukjiokmIm

With the world's advanced digital optical display technology, our projection TV is an improved product for better performance. The brightness is more than 450nits, peak contrast is up to 1000:1, picture uniformity is over 80% and the highest resolution is: PC 1024*768; HDTV 1920*1080P/1280*720P, with 16780,000 colours and 24bit true colour. •Digital HDTV-READY: Identify and receive 9 kinds of HDTV signal and DVD signal via YPbPr interface automatically: 1920*1080P @ 60Hz (16:9), 1920*1080l@50Hz

1 Open the battery cover. 2 Insert two size-AAA batteries. 3 Replace the cover and slide in reverse until the lock snaps. . Slide the cover while pressing down. . Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment. Precaution on battery use Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below. . Place batteries with their terminals corresponding to the (+) and (–) in