1067873-2-C Tools/Outils/Herramientas Before You Begin CAUTION:Riskofinjuryorproductdamage.Do not attempt to cut tempered glass. IMPORTANT!This door is designed to accommodate walls that are less than 3/8. (1 cm) out of plumb. Verify the area the door will be attached to is within 3/8. (1 cm) or better of plumb. The door may not function properly if the wall is more than 3/8. (1 cm) out of plumb. Before beginning the installation, measure the dimensions of the opening and confirm the model of do

En caso de problemas de instalacion o de funcionamiento, no dude en contactarnos. Este manual contiene nuestros numeros de telefono. Gracias nuevamente por escoger a Sterling. Instrucciones de cuidado y limpieza Superficies de vidrio: Utilice un jalador limpiaventanas para limpiar las superficies de las puertas de vidrio tras ducharse. Superficies acabadas, metalicas o pintadas: Nunca utilice productos de limpieza que contengan limpiadores abrasivos, amoniaco, cloro (lejia), acidos, ceras, alcoh

505D-42*-G26 Shower Smooth WatertideTM 1505D-42*-G51 Shower MoraineTM None 1505D-48* Shower Smooth Clear 1505D-48*-G06 Shower Rain None 1505D-48*-G10 Shower Pebbled None 1505D-48*-G26 Shower Smooth WatertideTM 1505D-48*-G51 Shower MoraineTM None 1505D-48*-G52 Shower NaturalistTM None Frame Colors/Finishes Refer to Price Book for additional colors/finishes Note: Add appropriate finish color/finish code to the end of the unit model # when ordering. Page 1 of 2 1060253-4-C For more info

Locate the outlet behind the whirlpool, and within 24" (610 mm) of the pump. Do not disassemble the pump or piping as this could void the warranty. Size the drain cutout to fit the drain assembly that will be used. End stud positioning is critical. Studs should be positioned roughly as shown. 16" (406 mm) 30" (762 mm) ¿4"6 mm) 6" (152 mm) (Typical) 24-1/2" (622 mm) 4" (102 mm) 8" ^ (203 mm)| 43-1/2" (1105 mm) I_3-1/8" (79 mm) Overflow Detail 1-1/2" (38 mm) T\ ^ 1 1 j8-3/4" 17-

COMPANY Features • Compression molded from our exclusive solid Vikrell® material • Innovative four-piece modular design for seamless appearance • Tongue-and-groove 4-piece modular design allows for easy ''snap together" installation • Durable high-gloss finish • 10-year consumer/3-year commercial limited warranty • Left or right drain • Available with or without above-the-floor drain • Wall surround allows for attachment of grab bars • 60' (152.4 cm) x 31-1/2' (80 cm) x 75-3/4" (192.4

PROVEN PERFORMANCE..! 0: White Other: Refer to Price Book for additional colors/finishes Specified Model Model ADA Compliant Complete Unit Description Colors/Finishes 71140115 60" (1524 mm) ADA compliant bath and wall surround, tile wall, left drain □ 0 □ Other 71140125 60" (1524 mm) ADA compliant bath and wall surround, tile wall, right drain □ 0 □ Other 71240115 60" (1524 mm) ADA compliant bath and wall surround, smooth wall, left drain □0 □ Other 71240125 60" (1524 mm) ADA compliant

COMPANY Features • Compression molded from our exclusive solid Vikrell® material • Tongue-and-groove 4-piece modular design allows for easy ''snap together" installation • Durable high-gloss finish • 5 Jets • 10-year consumer/3-year commercial limited warranty • Pump with air switch and grounding-type plug-in cord • 15" (38.1 cm) bath whirlpool depth (floor to top of threshold) • 60-1/4" (153 cm) x 31-1/2' (80 cm) x 73-1/2’ (186.7 cm) complete unit rough-in dimensions include flange •

(148.6 cm) 57-1/2. (146.1 cm) G 73-1/4. (186.1 cm) 75-1/2. (191.8 cm) NOTICE: All dimensions are nominal. The stud opening tolerance is +1/8. (3 mm)/-0. Carefully measure your fixture before determining enclosure size. Some shimming between the stud frame and the fixture may be required. If a firewall is required, rough-in dimensions will have to increase according to the thickness of the firewall material. Stud opening dimensions must be measured toward the exposed side of the wall material. Di

11. Install the Rollers -Outside Panel NOTE:The steel side of the roller must be installed against the top frame flange. Place the rollers on the top frame flange. The roller should face the bottom frame leg. Secure the rollers to the top frame flange with #8-32 x 3/8.hex washer head screws. Lay the outside door panel on a flat surface taking care to protect the glass. Cut two 7/8.(2.2 cm) long pieces of the provided adhesive tape. Remove the protective paper from the adhesive side of the tape a

COMPANY Features • Compression molded from our exclusive solid Vikrell® material • Two toilety shelves and 18' (45.7 cm) towel bar in back wall for added convenience • Tongue-and-groove 4-piece modular design allows for easy 'snap together' installation • Durable swirl-gloss finish • Left or right drain • 10-year consumer/3-year commercial limited warranty • 15" (38.1 cm) bath depth (floor to top of threshold) • 60-1/4" (153 cm) x 31-1/4" (79.4 cm) x 73-1/4" (186.1 cm) complete unit r