24 02984760 1 PIN 1-1/4 25 02969094 1 PRE-ASSEMBLY-60ROTARY /BAR 02969095 1 PRE-ASSEMBLY-60ROTARY /PAN 26 02969645 1 PLATE,S/N - BRAHMA ROTARY 27 02969647 1 DECAL,NAME--BRAHMA 30(BLACK) 28 02969648 1 DECAL,PICTURE - BRAHMA (BLACK) 29 02969677 1 HOSE #16-16FJX -16FJX - 68LG 30 02969678 1 HOSE #16-16FJX -16FJX45- 74LG 31 02969679 1 HOSE #16-16FJX -16FJX45- 69LG 32 3710151 4 METAL TACK 33 02968896 1 PLASTIC TIE 11LG 34 02968895 1 PLASTIC TIE 11LG 35 02968894 1 PLASTIC TIE 11LG 36 1458392 1 DECAL,RE

(Figure ASM-R-0151) ASSEMBLY © 2006 Alamo Group Inc. ASSEMBLY A96B 03/06 Assembly Section 3-13 CHAIN GUARD (EXTRA EQUIPMENT) CHAIN GUARDS: Front and Rear Chain Guards (Optional Equipment) are recommended for higher than normal usage (100 hours or more per year) and will provide protection from thrown objects with careful operation. Chain Guards must be maintained in good repair by replacing missing or worn sections or by being replaced when seriously worn or damaged. Front Chain Guards 1. Attach

Lights and a SMV emblem must be equipped directly on implements if the visibility of the tractor warning signals are obscured. Maintain all manufacturer equipped safety shields and guards. Always replace shields and guards that were removed for access to connect, service, or repair the tractor or implement. Never operate the tractor PTO with the PTO master shield missing or in the raised position. OPS-U- 0004 OPERATION ©2008 Alamo Group Inc. OPERATION A60/A72 01/08 Operation Section 4-6 4. Tract

Remove RH Rear Tire and Wheel (If Required, See Assembly Drawings sent with unit). Use proper Floor jack to lift the RH Rear Wheel, Support the tractor with proper jack stands rated appropriately for the tractors weight. The RH rear tire and wheel should be removed for this installation by using the Axtreme Boom (Asy. Man) 07/06 © 2006 Alamo Group Inc. Section 4 - 4 5. Install the new mount brackets to the tractor frame. (If Required, See Assembly Drawings sent with unit) The tank mounting brack

v Only work when visibility is good. v During use do not tip the unit and do not open the rear flap. v Familiarise yourself with the surroundings of your working area. Check for possible risks which might be not audible due to the noise of the machine. v Wear sturdy shoes and long trousers to protect your legs. v Ensure you keep your feet a safe distance from the moving parts. v Make sure that there are no other people (especially children) or animals anywhere near the working area. v Always pus

-Do Not smoke or have an open flame near the Mower and Tractor. -Do Not drive into burning debris or freshly burnt areas. -Ensure slip clutches are properly adjusted to prevent excessive slippage and plate heating. -Never allow clippings or debris to collect near drivelines, slip clutches, and gearboxes. Periodically shut down the Tractor and Mower and clean clippings and collected debris from the mower deck. (SGM-12) OPERATION © 2009 Alamo Group Inc. OPERATION FACLON 15/10 03/09 Operation Secti

It is convenient in many cases to work in 300 foot sections. Move the first Danger sign to the beginning of the freshly cleared area, place it, then take the first cutting area flag up to the end of the freshly cleared area 300 feet away. Walk and inspect the next 300 feet and place the second cutting area flag. Pick up the second DANGER sign, and take it a further 300 feet along the road or trail. Note that in many cases the DANGER area will extend in front of and behind the machine as well as

Never mow in darkness or foggy conditions where you cannot clearly see at least 100 yards(90 m) in front and to the sides of the tractor and mower. Make sure that you can clearly see and identify passersby, steep slopes, ditches, drop-offs, overhead obstructions, power lines, debris and foreign objects. If you are unable to clearly see these type of items discontinue mowing. (SGM-1) There are obvious and hidden potential hazards in the operation of this Mower. REMEMBER! This machine is often ope

Diese Garantieleistung bezieht sich auf alle wesentlichen Mangel des Gerates, die nachweislich auf Materialoder Fabrikationsfehler zuruckzufuhren sind. Sie erfolgt durch die Ersatzlieferung eines einwandfreien Gerates oder durch die kostenlose Reparatur des eingesandten Gerates nach unserer Wahl, wenn folgende Voraussetzungen gewahrleistet sind: . Das Gerat wurde sachgema. und laut den Empfehlungen in der Gebrauchsanweisung behandelt. . Es wurde weder vom Kaufer noch von einem Dritten ver sucht,

Alamo Group is not responsible for modifications to the MountKit to accommodate these differences. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 210-379-1480 © 2005 Alamo Group Inc. TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment