Contents subject to change without notice. Versions Model Description.........................................................Order # SHM 203 A 3-pin XLR plug, 300 mm................................................ 464.422 SHM 203 AS 3-pin XLR plug, On/Off-switch, 300 mm................................... 464.430 SHM 203 F 3-pin XLR socket, 300 mm.............................................. 464.449 SHM 203 FS 3-pin XLR socket, On/Off-switch, 300 mm................................. 464.45

This request is visually displayed by the flashing LED strips and the LED on the microphone button. Once the microphone has been enabled via the iCNS software, the LED stops flashing and is continuously lit. The delegate can deactivate the unit again by pressing the microphone button once more. If the maximum number of active microphones has been reached, the LEDs will only flash for a short time and the delegate must activate their microphone once again. ARCHITECT’S SPECIFICATIONS Digital deskt

The microphone button operates normal switching on and off of the microphone. The chairman does not depend upon the limited number of open microphones (NOM). Using the priority button the chairman can intervene into the discussion and mute or clear the activated delegate microphone units depending on the system configuration. Using the clear button all activated delegate microphone units are switched off. The Ready-to-Talk status of the microphone is indicated by the illuminated red ring and th

The original (OR) and a maximum of 7 target languages can simultaneously be transmitted on different carrier frequencies by narrow band frequency modulation. The transmitted signals are received by the SIR 320 receiver and can then be monitored with headphones. With miniature switches on the front panel the frequency band can be chosen and the channels can be switched ON or OFF. With a rotating switch it is possible to assign up to 32 transmission channels. 3 infrared transmitter diodes allow

48 x 13 mm: 1 line / 8 characters; character height: 7 mm • Five voting buttons • Four navigator buttons for channel selection and volume control of a connected headphone • Microphone button for switching the microphone on and off and requesting to speak • LED on the microphone button and LED strips on both sides of the housing indicate that the participant is requesting to speak or the microphone unit is in ready-to-talk mode • NetRateBus conference sockets (push-pull) for connection in the MCS

The half-spherical polar pattern is picked up in a uniform manner. The high sensitivity guarantees a constant output level even from long distance sources. Elastic bearing rings achieve mechanical isolation from the mounting surface and therefore offer effective sound isolation of the microphone. The MPC 23 is designed for applications such as tele/video conferencing, recording or amplification of round table discussions and wherever the microphone needs to be as unobtrusive as possible. Versi

48 x 13 mm: 1 line / 8 characters; height of character: 7 mm • Phone: internal • Clock • Menu buttons to operate the menus • Buttons (on the right hand side) to navigate through the menus and to control the headphone volume • 10 function buttons • Language selector • 2nd language selector for integrated loudspeaker • Big microphone button • Integrated 2-way loudspeaker • Bottom provides conference bus sockets • Rugged housing DESCRIPTION The MCS-D 2074 with removable gooseneck microphone is conf

. . . . . . . . . . . . . .Order # MC 930 Stereo-Set with 2 matched GST 500 Microphone stand, 3/8", MC 930, 2 x EA 19/25 and height 0.85 - 1.60 m, with 2 x WS 53 in a plastic case . . . .471.968 telescopic G 500 boom . . . . . . .406.252 MC 950 Condenser microphone, ST 400 Microphone stand, 3/8", supercardioid, with MKV 9 height 0.90 - 1.65 m . . . . . . . . .421.286 microphone clamp with ST 500 Microphone stand, 3/8", 3/8" - 5/8" internal thread, height 0.85 - 1.60 m . . . . . . . . .406.643 fo

8 D-74072 Heilbronn Tel. +49 (0)7131 / 617-0 Fax +49 (0)71 31 / 617-224 E-mail: info@beyerdynamic.de Internet: Features • High sensitivity • High gain before feedback • Non-glare surface • Available with ON/OFF-switch • Available in different lengths • Phantom power 11 - 52 volts • SHM 21X with illuminated LED ring Applications The gooseneck microphones of the SHM 203 - SHM 215 series are high output, miniature condenser microphones with extraordinary sensitivity. Their cardioid polar

At the lower end of the gooseneck there is an additional area for an open-end wrench to tighten the gooseneck. The microphone is simply put into the MCS 1xxx microphone station and is ready for operation. SHM 21x illuminated ring: (except SHM 214 I and SHM 215 I) The illuminated ring is operated with a series resistance. The current must not exceed 20 mA. Connection: pin 4/white wire: cathode, pin 5/blue wire: anode. In order to avoid interference, we recommend that the audio and the supply f