• Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine. MAINTENANCE AND STORAGE • Keep machine, attachments, and accessories in safe work ing condition. • Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to ensure the equip ment is in safe working condition. • Never store the machine with fuel in the fuel tank inside a bui

NOTE: When storing in a metal storage shed, rustproof the equipment, especially springs, cables and all moving parts.When storing any type of power equipment in a poorly ventilated or metal storage shed, care should be taken to rustproof the equipment, especially springs, cables and all moving parts. 10 SECTION 8: TROUBLESHOOTING GUIDE Problem Cause Remedy Engine fails to start 1. Fuel tank empty, or stale fuel 2. Blocked fuel line 3. Key not in ON position 4. Spark plug wire disconnected 5. Fau

Your new tiller allows you to till and cultivate your garden with ease, and accomplish other property management projects as well. Your tiller is famous for its ruggedness, performance and high-quality engineering. We know you’ll enjoy using it. Please carefully read this Manual. It tells you how to safely and easily assemble, operate and maintain your machine. Be sure that you and any other operators carefully follow the recommended safety practices at all times. Failure to do so could result i

Snowthrower TRACTOR ASSEMBLY S/N 420280100101- 420280199999 85 0 J41 40 . . Ve TOUCH-UP PAINT SERVICE PARTS 200 Black Spray Paint 202 Loctite 242 201 Green Spray Paint 203 Tire Chains 7Г* Щ. 32 35 «к 29 Ч1 2 Model 42028 Ref.# Part# Description Qty. Ref.# Part# Description Qty. 1 1703539 Handle Grip............................................ 2 51 1756065021 Frame.................................................. . 1 2 1750796 Bumper..........................................

Spring Return Fuel Tank Capacity................................................................................................................................. 14 ounces (415 ml) CULTIVATOR* Drive Shaft Tube .................................................................................................................................................. Steel Tube Throttle Control ...................................................................................................................

2 Bolt-hex hd„ 3/8-16x2"............. 4 Locknut-3/8"-16.......................... 4 This Ref. No. not used................. This Ref. No. not used................. Bolo Tine-single, left hand. Used on left and right side tine assy. Tine is stamped either “EL" or “AL". (Incl. two each of Ref. No.’s 8, 9 and 10)............................. 8 Bolo Tine-single, right hand. Used on left and right side tine assy. Tine is stamped either “ER" or “AR”. (Incl. same hardware as Ref. No. 6)......

Drain all fuel from the fuel tank into a container. Do not use fuel that has been stored for more than 60 days. Dispose of the old fuel in accordance to local regulations. 2. Start the engine and allow it to run until it stalls. This ensures that all fuel has been drained from the carburetor. 3. Allow the engine to cool. Remove the spark plug and put 1 oz. (30 ml) of high quality motor oil into the cylinder. Pull the starter rope slowly to distribute the oil. Reinstall the spark plug. NOTE: Remo

20. Use only attachments and accessories approved by the manufacturer. Failure to do so, can result in personal injury. 21. If situations occur which are not covered in this manual, use care and good judgment. Contact your dealer or telephone 1-800-800-7310 for assistance and the name of your nearest servicing dealer. Maintenance & Storage 1. Never tamper with safety devices. Check their proper operation regularly. 2. Check bolts and screws for proper tightness at frequent intervals to keep the

It is extremely important that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade. An unbalanced blade will cause excessive vibration when rotating at high speeds and may cause damage to the mower. The blade can be tested for balance by balancing It on a round shaft screwdriver. Remove metal from the heavy side until it balances evenly. NOTE It is recommended that the blade always be removed from the adapter for the best test of balance. C. Reassembly Befo

Place upper handle in position over lower handle, selecting hole for either high or low position. See figure 9. Secure with two curved head bolts (A), lock washers (B) and hex nuts (C) as shown in figure 3. Tighten securely using a 1/2" wrench. FIGURE 3. 4 5. Place the throttle control in position on right side of upper handle. Secure with hex bolt (E) and lock nut (F). See figure 4. NOTE Reference to right and left hand sides of the unit is observed from the operating position. FIGURE 4.