SRM-260SB S/N 05001001 - 05999999 Engine, Short Block, Ignition, Cylinder Cover..............................................................................................................4 Starter, Fuel System........................................................................................................................................................6 Clutch, Fancase........................................................................................................................

Both must be read and understood for proper and safe operation. Grass Trimmer Operator's Manual MODELS GT-230 Serial Number 03001001 - 04999999 WARNING DANGER Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation. 2 2 Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-jobdependability. Read and understand this manual a

See "Carburetor Adjustment" in the unit Operator's Manual. * WARNING! DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL TRIMMERS ** Arbor diameter of Upper Blade Plate must match arbor diameter of metal blades. *** New cotter pin required each time blade is installed. **** Brushcutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a double shoulder harness contents 1 U-handle assembly 1 Lower u-handle bracket (2 halves) 1 Harness clamp w/ring 1 5 x 12 mm bolt 1 8 x 55 mm bolt 1 Circ

Light-weight for comfort, yet heavy-duty for performance, the ECHO TC-210i Tiller/Cultivator features ECHO's exclusive i-75™ system which reduces the required starting effort by 75%. This makes the TC-210i quite possibly the easiest to use of all your powered garden tools. Features include a 21.2 cc Power Boost Vortex™ engine with electronic ignition, quad port emission technology and a purge-pump-equipped carburetor for quick, dependable starts. A worm gear-type transmission provides high rpm a

Experiment until you find the best position for your needs. For best performance, be sure engine recoil starter assembly, the blower intake and outlet areas are always kept clear and free of leaves or other debris. Maintenance Instructions Keep all nuts, bolts, and screws tight. Never store the blower with fuel in its fuel tank inside a building or in a confined space where fumes may reach an open flame or sparks. Always refer to the instruction manual for important details if the product is to

Pushing the saw too hard will slow the engine and cutting will actually be more difficult. Some material may adversely affect the housings of your chain saw. (Example palm Tree Acid, fertilizer etc.) To avoid housing deterioration, carefully remove all packed sawdust around clutch and guide bar area and wash with water. Coat metal parts with light oil. 17 CS-352 3 m (10 feet) Retreat Retreat Direction of fall 45° 45° Not this way Direction of fall Hinge 5 cm (2 in.) First cut Felling cut Notch 5

FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY. (UECHO INTRODUCTION INTRODUCTION Echo Weed and Grass Trimmers, Models GT-1100 and GT- 2400 are light-weight, high-performance, gasoline powered units designed for grass trimming. WARNING A DANGER ECHO supplies an operator’s manual and safety manual with each product. You must read and understand both manuals before you are can operate your ECHO product safely and effectively. The operator’s manual provides information necessary for operatio

If a tachometer is available, idle speed should be set to the specifications found on page 12 "Specifications" of this manual. B C A C WARNING DANGER When carburetor adjustment is completed, blades should not move at idle, otherwise serious personal injury may result. 24 24 CARBURETOR ADJUSTMENT Non Emissions Models Level 2 Tools required: Screwdriver with 2mm blade width, Tachometer (ECHO P/N 99051130017) Parts Required: None NOTE If carburetor has limiter caps follow "Carburetor Adjustment" pr

The following precautions are strongly recommended because the minimum exposure which might trigger the ailment is unknown. • Keep your body warm, especially the head, neck, feet, ankles, hands and wrists. • Maintain good blood circulation by performing vigorous armexercises during frequent work breaks and also by not smoking. • Limit the hours of operation. Try to fill each day with jobs where operating the trimmer or other hand-held power equipment is not required. • If you experience discomfo

Some believe that prolonged exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years. To reduce the risk of RSI/CTS, do the following: • Avoid using your wrist in a bent, extended, or twisted position. Instead, try to maintain a straight wrist position. Also, when grasping, use your whole hand, not just the thumb and index finger. • Take periodic breaks to minimize repetition and rest your hands. • Reduce the speed and force with which you do the repetitive