The QuadX 3000 is an accurate, ergonomic and powerful professional flash generator. In order to obtain the full benefit from your purchase, please spare a few moments to familiarise yourself with this user manual. Thank you. Bowens International Ltd SAFETY NOTES DO NOT : • Use in an environment where moisture or flammable vapour is likely to come in contact with the unit. • Insert or remove flash heads without first switching off • Restrict air vents while in use. • Use a unit with damaged cover

10 stop increments. With simple expansion to 3000Ws, find out how the Explorer’s punch is portable power, perfected! © 2005 photo by Reeve Banks Photography TOTAL control, unrivalled POWER! Ever wished you could control your location lighting as accurately as studio lighting? Presenting a 1500Ws battery generator with true asymmetric power distribution and control, from 31Ws to 1500Ws in 1. 10 stop increments. With simple expansion to 3000Ws, find out how the Explorer’s punch is portable power,

DO NOT ATTEMPT TO LOCATE AND REPLACE THE INTERNAL FUSE YOURSELF. • Control Panel Lights Up But Ready Indicator Does Not Light Up If this happens, first confirm that the AC-line voltage is adequate and within the prescribed limits. Confirm that the Flash Thermal Reset Button on the Rear Panel is pushed in. Under exceptional conditions of use, this may trip. Switch the unit off, wait a minute, push the button in and then switch power on again. • Modelling Lamps Are Not Working If all of the modell

at 2400W-s 1/1400 sec. at 600W-s One LED numeric display per channel ±1% at maximum power 230V AC, 50/60Hz / 90 - 130V AC, 50/60Hz Green Ready Indicator lights up at 100% charge. Audio Ready Signal and Modelling Intermittent when selected. 15A thermal breakers for charge and modelling 6V Switchable: On/Off Switchable: On/Off 650w (max.) x 2 Off, Proportional, 100% or Automatic 100% in either Continuous or Intermittent flash-indication mode. QUADX Flash Head (BW7660) 281 x 184 x 336mm (362mm inc.

® are registered trademarks of Bowens International Ltd. OPERATING INSTRUCTIONS Table of Contents Specification Specification Description Page Introduction and Safety Notes 3 Operation 4 Modelling Lamp Replacement 4 - 5 Flash Tube Replacement 5 Connection 5 Reflector / Accessory System 5 - 6 Specification 6 Unit QuadX Head QuadX (E11) Head Quad 3Km Head Part Number BW7660 BW7665 BW7646 Maximum Energy 3000Ws 3000Ws 3000Ws Flash Colour Temperature 5300K ±300K 5300K ±300K 5300K ±300K Circuit Protec

DO NOT ATTEMPT TO LOCATE AND REPLACE THE INTERNAL FUSE YOURSELF. • Control Panel Lights Up But Ready Indicator Does Not Light Up If this happens, first confirm that the AC-line voltage is adequate and within the prescribed limits. Confirm that the Flash Thermal Reset Button on the Rear Panel is pushed in. Under exceptional conditions of use, this may trip. Switch the unit off, wait a minute, push the button in and then switch power on again. • Modelling Lamps Are Not Working If all of the modell