With products and expertise in almost every segment of industry, Henkel engineers and chemists know the importance of understanding both the full scope of manufacturing processes as well as the complex challenges of very specific needs. These needs are met with a deep chemical knowledge that enables Henkel to respond with the most innovative solutions. Since the original development of a unique anaerobic The strength of the Loctite® Hysol® product range is in its technology, Loctite® products ha

Apply needle regulator with counter nut 15 for quantity of fluid flow. Turning needle regulator right: less fluid flow. Turning needle regulator left: more fluid flow. • Pull trigger at the valve body 4. Spray operation starts. You will notice that you receive so called “pre-air” prior to opening fluid flow when pulling the trigger. When releasing trigger you still have “purging-air” after needle has closed, nozzle and fluid flow Has stopped. This prevents that the fluid forms drops instead

7 4 Setup and Operation...............................................................................7 4.1 Setup........................................................................................................7 4.2 Operation..................................................................................................8 4.3 Shutdown..................................................................................................8 4.4 Return to Operation............................

Maximum speed / delivery capacity setup: • With the dispensing station in ready state, push OK button three times - display indicates Range Max.. Range max. • Use arrow keys to enter desired value. 75 % Arrow key assignment / setting range: left: -10; right: +10; up: +1; OK/ESC * down: -1; setting range: 30 – 100 • Push OK button to save the setting – display indicates "next menu item". Push ESC key to leave the operator menu – display indicates Operation. For recommended values see Section 8.4.

GENERAL INFORMATION (NEW SUBFLOORS OR RENOVATION) The subfloor must be absolutely hard, level, dry, smooth and structurally sound. The subfloor must be free of cracks and other irregularities and must not be contaminated with paint, plaster, oil, grease or any other substance which could affect adhesion. Cracks must be filled with an appropriate material. The following information provides you with basic installation procedures. For technical products or more detailed instructions please refer t

11 6.2 Changing the Filter ...................................................................................................... 11 7 Troubleshooting........................................................................................................12 8 Annex..........................................................................................................................13 8.1 Accessories and Spare Parts............................................................................