Hooked onto a table, your child is ready for mealtime or ready for an activity. • Exclusive double locking system secures seat to table and eliminates the need to adjust attaching mechanism after every use. • Fully padded seat and high back provide comfort and support. • Complete security with adjustable S-point safety belt. • Seat cushion is removable and washable. • Sturdy and durable all-steel construction. • Sets up and folds down in seconds. Slip into carry case and you’re ready to go
For the correct position of each arm you must have: a. Round rubber stopper positioned at front. b. Round red cap on clamp must face the outside of the chair. c. Rubber paddle-grip positioned at top 3. Slide each paddle-grip through the cover of each sleeve located on the side of the seat. Start from the back of the sleeve. Remember, the red plug on the clamp must be on the outside. 4 4. Remove the bfack plastic protective caps from the openings of both arms. Attach both arms onto the back
KEEP INSTRUCTIONS FOR FUTURE USE. Regalo International, LLC 14305 Southcross Drive Suite 100 Burnsville, MN 55306 952-435-1080 A WARNING: Failure to follow these warnings could result in serious injury or death. - Be sure hook-on chair is securely attached to table before seating child. - The child should be secured in the hook-on chair at all times by restraining system. - Never leave child unattended. Always keep child in view when in hook-on chair. - Check stability of table before and
KEEP INSTRUCTIONS FOR FUTURE USE. Regalo International, LLC. 14305 Southcross Drive, Suite 100, Burnsville, MN 55306 Phone: 952-435-1080 FAX: 952-435-1088 Important: Keep these instructions for future reference Flexi Gate from ADDITIONAL EXTENSIONS SOLD SEPARATELY! A WARNING: Intended for young children aged six months through 24 months. Check the gate regularly to see if all the hardware and mountings are tight. To prevent serious injury or death, securely install gate or enclosure and u
These Wall Mounting Hinges must be used in securing your gate to the wall . If not, the gate can become dislodged from the opening and unstable. (1) Check to make sure you have the following components before you begin to set up your gate. (1). Folded Gate Frame, and Wall Mounting Assembly (2). Mounting Screws x 8 pcs. (1) 1 pc to (2) 8 pcs (2) Step 1. Preparing to Install your Gate Begin by unfolding the gate frame. To do this simply loosen the Locking Knobs at each pivoting joint by
Improp er installation coulcl result in the gate becoming dislodged from the doorway, or unstable. Always make sure the extension is securely attached to the gate before using. The safety of your child is your responsibility. Note :I fusing this gate at the top of stairs,the 4 Wall Cups MUST be used.If not use, the gate could be dislodged from the opening. Instructions for Gate Extension D-i ID X t=o It is preferable to inst all the ext ension 011 the hinge side of the gate. If you have a
_rij-AIOir IMPORTANT PEOPLE tN I*6 FOR THE MOST IMPORTANT PEOPLE IN THE WORLD Top of Stairs Gate Model 1230& 1235 A WARNING: _ IMPORTANT! KEEP FOR FUTURE REFERENCE! To prevent serious injury or death, securely install gate and useaccording to manufacturer's instructions. Never use with a child able to climb over or dislodge the gate. Never leave child unattended. • Use only with gate lock securely engaged. Do not use if any components are missing or damaged. This product wifi not necessa
Improper installation could result in the gate becoming dislodged from the doorway, or unstable. Always make sure the extension is securely attached to the gate beforeusing. The safety of your child is your responsibility. Note:Ifusing this gate at the top of stairs,the 4 Wall Cups MUST beused.Ifnot used, the gate could be dislodged from the opening. It is preferable to install the extension on the hinge side of the gate. If you have an application that requires additional extensions, please c
Now, take 1 of the 2.5" inch long Wall Screws and put it through the bottom screw hole in the Vertical Mounting Tube which should be aligned with the hole in the Plastic Wall Spacer. If properly aligned, the Wall Screw should go all the way through and touch the wall. If not, re-align the holes. 4. Next, screw the Wall Screw into the wall but DO NOT fully tighten the screw at this point. 5. a.) Next, take the 2nd Plastic Wall Spacer and, from the top of the tube, slide it behind the Vertical M