LOC ON appears on the display and only local stations are available. When you turn it off both distance and local stations can be received. Note: The function is invalid in AM tuning. Selecting the Stored Station During radio mode, press ^/^ buttons on the RC or on the front panel to select the stored station upward/downward. MO/ST Selector During radio mode, you can press ST/AUDIO button on the remote control to select mono mode or stereo mode. Stereo reception is on when ST ON appears. It

Press and hold for 2 seconds to start automatic station searching. 3. MOD BUTTON Press it to select the mode: RADIO => AUX => DISC. 4. VOLUME KNOB Rotate VOLUME knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level. 8 5. INFRA RED SENSOR 6. SEL BUTTON Press SEL button repeatedly to select the audio setting: VOL => BAS => TRE => BAL => FAD => DSP = > LOUD. Press and hold for 2 seconds to set the equalizer setting. Rotate the VOLUME/MENU knob to se

For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents....................................................................................................................................................................................2 Important safeguards....................................................................................

When user releases the button, then seek stops when station is detected. VOL LAST - VOL ADJUST When VOL LAST is selected, the volume level adjusted by the user is selected whenever the power is on and off. When VOL ADJ is selected you can adjust the volume level that will be active whenever the power is on. 16 Disc operations Loading/Eject a disc • Open the front panel. Insert the disc with the printed side facing upward into the slot. Close the panel. The CD will play automatically. • Ope

Operation interval is at least 2 seconds. 4. Press Power to turn on the machine before pressing CH+/CH-buttons for channel selection. Button functions Number buttons and two-digit button: There are 0 - 255 in total of 256 channels available on the RC for your option by the number buttons and two-digit button on the RC. When the channel is a one-digit figure, just press the corresponding number button. If the channel is a two-digit figure, you should press two-digit button first to show - - on

Turn on the various components and slowly increase the volume. Remember to check and re-check all connections to ensure proper installation and use. • Do not continuously use the speaker system beyond the nominal power handling capacity. • Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system to protect them from damage caused by the magnets in the speakers. • If you cannot find the appropriate mounting location, consult your car dealer or

Your set will not work normally from the battery supply, but there is now the advantage that, in case there is a mains current failure, your clock will continue to work. The clock display will not light up, the clock time will be held in the clock memory by the battery back-up system. • This enables you to move the set from place to place without re-setting the clock every time. The battery back-up system is only meant to be used from short temporary power failures. For longer durations the bat

For details, refer to the following illustrated installation methods. DIN FRONT-MOUNT (Method A) 1. Car dashboard 2. Sleeve 3. Screw 4. Nut 5. Spring washer 6. Screw 7. Metal strap 8. Flat washer 5 1. 3. 4. 5. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix t

Also, you can display this menu by pressing MENU button. Cursor buttons Press cursor buttons to navigate in various menus. ENTER Press ENTER button for confirmation of chosen options. 10 SETUP Press SETUP button to enter or exit the system setup menu. PBC Press this button to turn on or off Playback Control (PBC) function. PROG • If the disc contains 2 or more tracks, chapters or titles, set up the playing order to your preference. Press PROG button to enter program menu. • Press num

It is necessary to refer the manual. • Do not install the subwoofer where it may be subjected to excessive heat moisture, dust or where it will be kicked repeatedly, brushed or bumped. • Make absolutely sure that the terminals for the subwoofer are connected to the proper outputs from the music source. • Never run the wiring on the outside of the vehicle or under it where it can be damaged by road hazards or the moving parts of the vehicle. Use existing wire channels, sills, panels and moldin