Log:
Trier : Nom ↑   Téléchargements   Évaluation   Taille ↑  

Delta Pharo DP Lift 2 M 20

Téléchargements : 91 Taille : 2 mb    Fabricant : Delta  
Catégorie : Plomberie

(attention for minimum room height of 87 from tub-floor) Flush through the supply pipes. SW 0 mm SW mm O 0 mm O8 mm SW 24 mm 1 2 1. 2. 1. 2. Wall Installation 3 4 SW 13 mm SW 2 mm Wall Installation Adjustment Thermostatic mixer please see page 14 Fitting Items / Water Connections Overview Corner Installation 0 2x 2x 2x1x Seal all drill holes with silicone free from acetic acid (not in scope of delivery) Fitting items / water connections corner installation Before drilling the bottom holes pay at

Delta 50-181

Téléchargements : 85 Taille : 9 mb    Fabricant : Delta  
Catégorie : Autres outils

Fire resistant aluminum foil lined fiberdrum. 24* diameter x 31 "high. 14 lbs. No. 50-311 Drum DoUey. 5-wheel. Accommodates 55-gallon capacity fiber or metal drum. Adds portability to your dust collector system. No. 50-225 2' Diameter x 3f Dust Bag. 22 sq. ft. filter area. New 3-dimensional weave for improved dust retention. With drawstring to fit standard 55-gallon drum. For use with No. 50-1801 HPaod 50-181 2 HP Dust Collectors for planer chip pick up. Also No. 50-1801 HP Unit when major u

Delta Horizontal Band Saw

Téléchargements : 62 Taille : 26 kb    Fabricant : Delta  
Catégorie : Jig Saw et

Check to see that they are in place, properly adjusted, secured, and working correctly. 5. USE PROPER BLADE SIZE and type. 6. ADJUST THE UPPER BLADE GUIDE so that it is about 1/8" above the workpiece. 7. PROPERLY ADJUST the blade tension, tracking, blade guides, and blade support bearings. 8. KEEP ARMS, HANDS, AND FINGERS away from the blade. 9. AVOID AWKWARD OPERATIONS and hand positions where a sudden slip could cause a hand to move into the blade. 10. NEVER START THE MACHINE before clea

Delta TP305

Téléchargements : 57 Taille : 2 mb    Fabricant : Delta  
Catégorie : Avions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY GUIDELINES - DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ADDITIONAL SPECIFIC SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delta TE-4000

Téléchargements : 50 Taille : 1 mb    Fabricant : Delta  
Catégorie : Shop Equipment

This allocation will give you 20 clerks and 100 tables Enter 07 then enter 20 Enter 11 then enter 200 Enter 15 then enter 100 Enter 35 then enter 800 Enter 49 then enter 800 Enter 60 then enter 1500 Enter 93 then enter 7 This completes the simple set up of check tracking files The next pages will explain the memory allocation in detail Memory allocation File definition codes Enter the file code 1, 2, 3, 4, 5 before the file number The new files in the memory allocation File 019 Time and Attendan

Delta ShopMaster 638517-00

Téléchargements : 47 Taille : 32 mb    Fabricant : Delta  
Catégorie : Perceuses et shuropopverty

For Parts, Service, Warranty or other Assistance, please call 1-800-223-7278 (In Canada call 1-800-463-3582). FRANCAIS : PAGE 34 10" Bench Drill Pre s s (Model SM300) PART NO. 638517-00 10-30-05 Copyright © 2005 Delta Machinery ESPANOL: PAGINA 18 To learn more about DELTA MACHINERYvisit our website at: For Parts, Service, Warranty or other Assistance, please call 1-800-223-7278 (In Canada call 1-800-463-3582). FRANCAIS : PAGE 34 GENERAL SAFETY RULES Woodworking can be dangerous if safe and prope

Delta 36-755

Téléchargements : 42 Taille : 1 mb    Fabricant : Delta  
Catégorie : Jig Saw et

saw blade, table insert, arbor and motor pulleys, V-belt, (2) table extension wings, motor cover; 2HP, 230V, single phase, 60 Hz., TEFC motor; motor starter and instruction manual. Model 36-751 10" Tilting Arbor Saw with 30" Unifence Saw Guide and 34-914 Accessory Table Board. Model 36-755 10" Tilting Arbor Saw Model 36-751 10" Tilting Arbor Saw with 30" Unifence® Saw Guide. Same as Model 36-755 above less Jet-Lock®, Micro-Set® rip fence with front and rear guide bars and (1) table extension

Delta 4000

Téléchargements : 42 Taille : 795 kb    Fabricant : Delta  
Catégorie : Métal

Always begin use at a reduced sensitivity level; this device is designed to work “into-the-noise”, so expect chatter at high sensitivity. 2) Do not use indoors. This detector is for outdoor use only. Many household appliances emit electromagnetic energy, which can interfere with the detector. If conducting an indoor demonstration, turn the sensitivity down and keep the search coil away from appliances such as computers, televisions and microwave ovens. If your detector beeps erratically, turn of

Delta ShopMaster CP200

Téléchargements : 41 Taille : 1 mb    Fabricant : Delta  
Catégorie : matériel de pompage

Pressure switch "cut-out" too high. unit does not shut off contact a Trained Service Technician. Contact a Trained Service Technician. Air leaks at Tube fittings are not tight Using a soapy water solution fittings. enough. check all exposed fittings for leaks. If needed reseal fittings with pipe sealant tape and retighten securely. Do Not Overtighten. If leaks continue contact a Trained Service Technician. Air leaks in air Defective air tank. Air tank must be replaced. tank or at air Do not repa

Delta 36-900

Téléchargements : 34 Taille : 665 kb    Fabricant : Delta  
Catégorie : Jig Saw et

422-04-651-0035 Dated: 7-22-96 MODEL 36-900 LIMITED EDITION NEW YANKEE WORKSHOP UNISAW The 36-900 Limited Edition, New Yankee Workshop Unisaw is equipped with a 52" Unifence, with table board and lower shelf, and features chrome handwheels, carbide-tipped saw blade and a personalized, engraved nameplate. For safety procedures, assembly, adjustments and operating instructions on the Limited Edition Unisaw, refer to the instruction manuals supplied with the Unisaw and Unifence, except as follows





catégories