Log:
Trier : Nom ↑   Téléchargements   Évaluation   Taille ↑  

Woodstock W1744

Téléchargements : 34 Taille : 3 mb    Fabricant : Woodstock  
Catégorie : Avions

Woodstock W1683

Téléchargements : 26 Taille : 5 mb    Fabricant : Woodstock  
Catégorie : Avions

5. Avoid dangerous environments. Do not operate this machine in wet or open flame environments. Airborne dust particles could cause an explosion and severe fire hazard. 6. Ensure all guards are securely in place and in working condition. 7. Make sure switch is in the “OFF” position before connecting power to machine. 8. Keep work area clean and free of clutter, grease, etc. 9. Keep children and visitors away. All visitors should be kept a safe distance away while operating unit. 10. Childproof w

Woodstock M1015

Téléchargements : 26 Taille : 2 mb    Fabricant : Woodstock  
Catégorie : Machines-outils

Woodstock M1020

Téléchargements : 25 Taille : 6 mb    Fabricant : Woodstock  
Catégorie : Machines-outils

Woodstock W1679

Téléchargements : 24 Taille : 3 mb    Fabricant : Woodstock  
Catégorie : Avions

5. As your leading hand gets within 4" of the cutterhead, lift the push block up and over the cutterhead and place it on the work- piece as it passes over the outfeed table. Do the same thing when your trailing hand nears the cutterhead and try to maintain pressure on the outfeed table. Never let your hands get closer than 4" from the cutterhead! 6. Repeat steps 4-5 until the surface is flat. OPERATIONS -23 OPERATIONS -24- Edge Jointing Edge jointing is passing the workpiece over the jointer on

Woodstock M1016

Téléchargements : 23 Taille : 73 kb    Fabricant : Woodstock  
Catégorie : Machines-outils

Woodstock W1752

Téléchargements : 21 Taille : 2 mb    Fabricant : Woodstock  
Catégorie : Machines-outils

• Lighting: Lighting should be bright enough to eliminate shadow and prevent eye strain. • Electrical: Electrical circuits must be dedicated or large enough to handle amperage requirements. Outlets must be located near each machine, so power or extension cords are clear of high-traffic areas. Follow local electrical codes for proper installation of new lighting, outlets, or circuits. MAKE your shop “child safe.” Ensure that your workplace is inaccessible to youngsters by closing and locking all

Woodstock SHOP FOX D3271

Téléchargements : 20 Taille : 182 kb    Fabricant : Woodstock  
Catégorie : Air

Mount the regulator as close as possible to the air tools. Keep in mind that water will drain from the collection cup when the airline is not pressurized, so do not mount in a moisture sensitive location. See Figure 2 for airline connection information. ADJUSTMENT The Model D3271 features a locking adjustment knob. Pull the knob up to adjust the pressure, and push the knob down to lock the adjustment knob in place. DO NOT adjust the regulator over 150 PSI! MAINTENANCE Always drain the collec

Woodstock W1694

Téléchargements : 18 Taille : 3 mb    Fabricant : Woodstock  
Catégorie : Avions

9. Remove the wood that is holding the blade Top Dead Center Figure 25. Blade is positioned at its highestposition (Top Dead Center). Figure 26. Checking the blade height. Figure 27. Blade clamp screws. ADJUSTMENTS guard open. -19 Depth Of Cut The depth of cut is equal to the distance between the infeed table surface and the top of the cutterhead blade at top-dead-center (Figure 28). The depth of cut is adjusted by raising and lowering the infeed table. To adjust the depth of cut: • Turn the tab

Woodstock M1109

Téléchargements : 16 Taille : 13 mb    Fabricant : Woodstock  
Catégorie : Machines-outils

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. #8232CR Printed in China ...................................................................................................................................................................................................................................................................................................................................................





catégories