• If necessary, contact your local authority for disposal information. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate

If the collection bag becomes worn or damaged, replace. 1. Mains cables and extensions are available from your local Husqvarna Outdoor Products Approved Service Centre. 2. Only use extension cables specifically designed for outdoor use. AWARNING: If received assembled, ensure your unit is properly assembled and all fasteners are secure. Cables Assembly Instructions Vacuum Assembly How to convert unit from vacuum use to blower use Cable restraint 1 2 3 3 Starting and Stopping AWARNIN

6. Should it be necessary for work to be carried out by your Service Centre, it is important to take your complete machine including cable and any extension cables used. A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase. All of the centres listed stock genuine Spare Parts. NOTE:

9. Never cut grass by pulling the product towards you. 10. Switch off before pushing the mower oversurfaces other than grass. 11. Never operate the product with damaged guardsor without guards in place. 12. Keep hands and feet away from the blade at alltimes and especially when switching on themotor. 13. Do not tilt product when the motor is running, except when starting and stopping. In this case, do not tilt more than absolutely necessary andlift only the part which is away from the operator.

IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 0844 844 4558 UK 1800 882 350 ROI Fax : 01325 302530 Safety If not used properly this product can be dangerous! This product can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this product. The operator is responsible for following the warning and safety instructions in this manual and on th

Explanation of Symbols on your product Warning Read the user instructions carefully to make sure you understand all the controls and what they do. Always keep the product on the ground when operating. Tilting or lifting the product may cause stones to be thrown out. Keep bystanders away. Do not mow whilst people especially children or pets are in the area. Beware of sharp blades - remove plug from mains before maintenance or if cable is damaged. Blades continue to rotate after the machine is swi

Assembly of Lower Handles to Lawnmower C1 C2 C3 1. Pull the lower handle bolt until it locks into position as illustrated in fig C1. 2. Place the Spring over the Bolt (C2) 3. Insert the Pivot Block on to the Bolt (C3) Repeat for the other side. D1 D3 D4 x3 pivot block lower handle washer cam lock D2 E1 E2 x3 E4 E5 E6 4. Fold down the Cam Lock towards the Handle as illustrated in fig E4, and continue to turn clockwise (E5) until tightened. 5. The Cam Lock can be unlocked and locked as illustrat

-before leaving the product unattended for any period; 9. Switch off, remove plug from mains and examine -before clearing a blockage; electric supply cable for damage or ageing before -before checking, cleaning or working on the appliance; winding cable for storage. Do not repair a damaged -if you hit an object. Do not use your product until you cable, replace it with a new one. Use only Flymo re-are sure that the entire product is in a safe operating placement cable. condition.; 10. Always wind

• When the window/grassbox is full it is time to empty the grassbox. grassbox empty grassbox full G 1 2 3 H Visimo Only Cutting Height Adjustment Cutting Height Adjustment (K) & (L) • Height of cut is adjusted by raising or lowering the Front and Rear Wheels. • There are five heights of cut on this product. • NOTE A medium height of cut is recommended for most lawns. The quality of your lawn will suffer and collection will be poor if you cut too low. HEIGHT OF CUT WHEELS POSITION Low Front posit

Never allow children or people unfamiliar with the instruc-signs of wear or damage and repair as necessary. tions to use the machine. 4. Replace worn or damaged blades together with their 3. Stop using the machine while people, especially children, fixings in sets to preserve balance. or pets are nearby. Use 4. Only use the product in the manner and for the func-1. Use the product only in daylight or good artificial light. tions described in these instructions. 2. Avoid operating your product in